Sure Pass Exam 220-1101 PDF

The correct answer is D. VPN.

A VPN (Virtual Private Network) is a service that allows a remote user to access network resources securely over the internet. A VPN creates an encrypted tunnel between the user’s device and the VPN server, which acts as a gateway to the network. The user can then access the network resources as if they were directly connected to the network, without exposing their traffic to eavesdropping, interception, or censorship.

A VPN can provide remote users with access to various services on a company network, such as file and print services, client/server applications, and remote network administration1. A VPN can also protect the user’s privacy and identity online by masking their IP address and location.

The first thing that the technician should check when troubleshooting a wireless network issue with slow throughput and frequent connection drops is the channel interference. Channel interference is a common cause of poor Wi-Fi performance, as it occurs when multiple wireless networks or devices use the same or overlapping frequency bands, resulting in signal degradation, congestion, or collision. Channel interference can affect both 2.4 GHz and 5 GHz networks, but it is more likely to happen on the 2.4 GHz band, as it has fewer and narrower channels than the 5 GHz band.

To check for channel interference, the technician can use a Wi-Fi analyzer tool, such as the ones found in the web search results123, to scan the wireless environment and identify the best channel to use for the network. A Wi-Fi analyzer tool can display various information, such as the network name (SSID), signal strength (RSSI), channel number, frequency, bandwidth, and security type. The technician can look for the following indicators of channel interference:

High network density: If there are many wireless networks or devices in the vicinity, they may compete for the same or adjacent channels, causing interference and congestion. The technician can look for the number of networks or devices on each channel and avoid the crowded ones.

Channel overlap: If there are wireless networks or devices that use the same or partially overlapping channels, they may interfere with each other and degrade the signal quality. The technician can look for the channel width and frequency of each network and avoid the overlapping ones. For example, on the 2.4 GHz band, the technician should use only the non-overlapping channels 1, 6, and 11, and avoid the channels in between.

Signal interference: If there are other sources of electromagnetic radiation or noise that operate on the same or similar frequency bands as the wireless network, they may interfere with the wireless signals and cause distortion or loss. The technician can look for the signal strength and quality of each network and avoid the ones that are weak or noisy. For example, some common sources of signal interference are microwave ovens, cordless phones, Bluetooth devices, or baby monitors.

To fix the channel interference issue, the technician can try the following solutions:

Change the channel of the wireless network: The technician can use the Wi-Fi analyzer tool to find the least congested and most optimal channel for the network, and then change the channel settings on the router or the access point. The technician should also consider using the 5 GHz band instead of the 2.4 GHz band, as it offers more and wider channels and less interference.

Relocate the router or the access point: The technician can move the router or the access point to a different location, away from potential sources of interference or obstacles that may block or weaken the wireless signals, such as walls, furniture, or metal objects. The technician should also place the router or the access point in a central and elevated position, to provide better coverage and signal quality for the network.

Upgrade the router or the access point: The technician can replace the router or the access point with a newer and more advanced model, that supports the latest Wi-Fi standards, such as Wi-Fi 6 (802.11ax) or Wi-Fi 5 (802.11ac). These standards offer higher data rates, lower latency, and better performance in dense and noisy environments, compared to the older standards, such as Wi-Fi 4 (802.11n) or Wi-Fi 3 (802.11g).

The correct answer is C. Ethernet.

An Ethernet cable is a type of network cable that is used to connect devices on a local area network (LAN), such as computers, routers, switches, and modems. Ethernet cables have RJ-45 connectors at both ends, which are similar to telephone jacks but larger. Ethernet cables can carry data signals at speeds ranging from 10 Mbps to 10 Gbps, depending on the type and quality of the cable.

A cable modem is a device that connects to a coaxial cable from a cable service provider and provides high-speed internet access. A SOHO router is a small office/home office router that connects to a cable modem or DSL modem and provides network and internet access to multiple devices on a LAN. A SOHO router typically has one WAN port and four LAN ports. The WAN port is used to connect to the cable modem or DSL modem, while the LAN ports are used to connect to computers or other devices on the LAN.

To connect a cable modem to a SOHO router, an Ethernet cable is needed. The Ethernet cable is plugged into the WAN port of the SOHO router and the Ethernet port of the cable modem. This allows the SOHO router to receive an IP address from the cable service provider and share it with the devices on the LAN using network address translation (NAT). The SOHO router also provides firewall and wireless features for the LAN.

The other options are incorrect because they are not suitable for connecting a cable modem to a SOHO router. FireWire is a type of serial bus that is used to connect devices such as digital cameras, external hard drives, and audio interfaces. FireWire cables have different connectors than Ethernet cables and cannot be used for network communication. Fiber is a type of optical cable that uses light signals to transmit data over long distances. Fiber cables have special connectors that are not compatible with Ethernet ports. Coaxial is a type of copper cable that has a central conductor surrounded by an insulating layer and a braided shield. Coaxial cables are used for cable TV and internet services, but they cannot be directly connected to Ethernet ports without an adapter.

The correct answer is D. Identify the problem.

The first troubleshooting step that the technician should perform is to identify the problem. This means that the technician should gather information from the user and the system, and analyze the symptoms and the error messages to determine the nature and the scope of the issue. Identifying the problem can help to define the expected outcome, establish a theory of probable cause, and plan a course of action.

The other options are not the first troubleshooting steps, but they are part of the troubleshooting process that should be performed after identifying the problem. Establishing a plan of action (option A) means that the technician should devise a strategy to resolve the issue, based on the theory of probable cause and the available resources. Testing the theory (option C) means that the technician should verify if the theory of probable cause is correct, by performing tests or experiments on the system or its components. Documenting the findings (option B) means that the technician should record and report the results of each troubleshooting step, as well as the final solution and outcome.

For more information about troubleshooting steps and best practices, you can refer to the following web search results: [Troubleshooting Steps for Beginners], [Troubleshooting Methodology], [How to Troubleshoot Like an Expert].