220-1101 Questions Bank

The correct answer is A. Tethering.

Tethering is the process of sharing a mobile device’s internet data connection with other devices, such as laptops, tablets, or other phones. Tethering can be done by using a Wi-Fi hotspot, a Bluetooth connection, or a USB cable. A Wi-Fi hotspot creates a wireless network that other devices can join, a Bluetooth connection pairs the devices and allows data transfer, and a USB cable connects the devices physically and enables data sharing.

A PAN, or personal area network, is a type of network that connects devices within a short range, usually up to 10 meters. A PAN can be used for various purposes, such as transferring files, printing documents, or accessing the internet. A PAN can be created by using Bluetooth, Wi-Fi, or infrared technologies.

A technician can use a PAN to connect a group of users on a field project by using tethering on a mobile device. The technician can activate the tethering service on the mobile device and choose the preferred method of sharing the internet data connection. The other devices can then connect to the mobile device and access the internet through it.

The other options are incorrect because they are not services that can share the internet data connection on a mobile device. Pairing is the process of establishing a connection between two Bluetooth devices, but it does not necessarily share the internet data connection. Bluetooth is a technology that can create a PAN and enable tethering, but it is not a service that can be activated on a mobile device. Hotspot is a term that can refer to a Wi-Fi hotspot created by tethering on a mobile device, but it is not a service that can be activated on its own.

The correct answer is B. Check the power supply wattage rating.

A possible cause of the desktop randomly shutting down during operations is that the power supply is not able to provide enough power for the high-end graphics card. The power consumption of today’s graphics cards has increased a lot, and the top models demand between 110 and 270 watts from the power supply1. Therefore, the technician should check the power supply wattage rating and make sure it is sufficient for the graphics card and the rest of the components. Confirming the power supply is grounded, checking whether the power supply is redundant, or confirming the power cables are well connected are not likely to solve this problem.

The best way to protect the data of a virtual machine in the event of hardware failure is to use a cloud-based backup solution. A cloud-based backup solution is a service that copies and stores the data of a virtual machine to a remote server or storage device over the internet. A cloud-based backup solution can offer several benefits, such as:

High availability and reliability: A cloud-based backup solution can ensure that the data of a virtual machine is always accessible and recoverable, even if the hardware that hosts the virtual machine fails or is damaged. A cloud-based backup solution can also provide redundancy and fault tolerance, by replicating the data across multiple locations or regions.

Scalability and flexibility: A cloud-based backup solution can adapt to the changing needs and demands of the virtual machine, by allowing the user to adjust the backup frequency, retention period, and storage capacity. A cloud-based backup solution can also support different types of backup, such as full, incremental, or differential, depending on the user’s preferences and requirements.

Cost-effectiveness and simplicity: A cloud-based backup solution can reduce the cost and complexity of maintaining a backup infrastructure, by eliminating the need to purchase, install, or manage hardware, software, or licenses. A cloud-based backup solution can also automate and streamline the backup process, by providing easy-to-use tools and interfaces, such as web portals, APIs, or scripts.

Other options, such as redundant hardware, UPS, or RAID, may improve the performance or resilience of the hardware that hosts the virtual machine, but they do not provide a complete protection for the data of the virtual machine in the event of hardware failure. Redundant hardware is a technique that uses multiple components or devices to perform the same function, so that if one fails, another can take over. UPS (uninterruptible power supply) is a device that provides backup power to a system in case of a power outage or surge. RAID (redundant array of independent disks) is a technology that combines multiple disks into a logical unit, to improve the speed, capacity, or reliability of the storage. However, these options may not prevent data loss or corruption due to other causes, such as human error, malware, or natural disasters. Therefore, a cloud-based backup solution is the best way to protect the data of a virtual machine in the event of hardware failure.

The correct answer is C. Cat 6.

An RJ45 connector is a standard type of physical connector for network cables. RJ45 connectors are used almost exclusively with Ethernet cables and networking1. Ethernet cables are twisted pair cables that carry data signals between devices on a network, such as computers, routers, switches, and servers2.

There are different categories of Ethernet cables, such as Cat 5, Cat 5e, Cat 6, and Cat 7, that have different specifications and performance levels. Cat 6 is one of the most common types of Ethernet cables, which supports data transfer speeds up to 10 Gbps and bandwidth up to 250 MHz3. Cat 6 cables have four pairs of copper wires, each with a plastic insulation and a foil or braided shield. The wires are twisted together to reduce crosstalk and interference4.

To terminate a Cat 6 cable, an administrator needs to use an RJ45 connector that matches the wiring scheme of the cable. There are two common wiring schemes for Ethernet cables: T568A and T568B. The administrator needs to strip the cable jacket, untwist the wires, arrange them in the correct order according to the chosen scheme, trim the excess wire, and insert them into the RJ45 connector. Then, the administrator needs to use a crimping tool to secure the wires and the connector4.

Optical cables are not terminated with RJ45 connectors, but with different types of connectors that can transmit light signals, such as SC, ST, LC, or MTRJ connectors. Optical cables are used for fiber-optic networks that can carry data over long distances at high speeds.

Serial cables are not terminated with RJ45 connectors, but with different types of connectors that can transmit serial data signals, such as DB9, DB25, or DE9 connectors. Serial cables are used for connecting devices that use serial communication protocols, such as modems, printers, scanners, or keyboards.

USB cables are not terminated with RJ45 connectors, but with different types of connectors that can transmit universal serial bus data signals, such as USB-A, USB-B, USB-C, or Micro-USB connectors. USB cables are used for connecting devices that use USB communication protocols, such as flash drives, cameras, mice, or chargers.