Changed 220-1101 Exam Questions

S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) is a feature of hard drives that monitors various parameters, such as temperature, error rate, spin-up time, and seek time, to assess the health and performance of the drive. S.M.A.R.T. can also predict the likelihood of failure based on the historical trends of these parameters. A technician can check the S.M.A.R.T. information of a hard drive using various tools, such as the BIOS, the operating system, or third-party software. Checking the S.M.A.R.T. information can help the technician diagnose the cause and severity of the drive corruption and determine the best course of action.

CHKDSK (Check Disk) is a command-line utility that scans the file system and the disk surface for errors and attempts to fix them. CHKDSK can also recover readable data from bad sectors and mark them as unusable. A technician can run CHKDSK on a corrupt drive using various options, such as /f (fix errors), /r (recover data), or /x (dismount the drive). Running CHKDSK can help the technician repair the drive corruption and retrieve the missing files.

References:

How to Check Your Hard Drive’s Health | PCMag1

How to Check a Disk from Windows - dummies2

How to Use CHKDSK in Windows 10 - Lifewire3

The 8-pin PCle power cable is designed to supply power to a graphics card that requires more power than the PCle slot can provide. A workstation that is running multiple GPUs in an SLI configuration would need this cable to ensure adequate power delivery and stability. The other cables are not suitable for this purpose, as they are either meant for the motherboard (4+4-pin ATX12V and 8-pin ATX12V) or for older devices (4-pin Molex)

The most important step the technician should take before proceeding is A. Verify the device is fully charged and connected to a power supply.

Firmware is a type of software that controls the basic functions and operations of a device, such as a router, printer, or scanner. Firmware can be updated to fix bugs, improve performance, or add new features to the device. However, updating firmware can also be risky, as it may cause the device to malfunction or become unusable if the update process is interrupted or corrupted.

One of the main causes of firmware update failure is power loss, which can occur if the device runs out of battery or is disconnected from the power source during the update. Power loss can damage the firmware and prevent the device from booting up or functioning properly. Therefore, it is essential to verify that the device is fully charged and connected to a power supply before updating the firmware. This can ensure that the device has enough power to complete the update process and avoid any interruptions or errors.

The other options are not as important as verifying the power status of the device. Ensuring the device has adequate storage space for the update is a good practice, but it is not likely to cause a major problem if the device does not have enough space. The update process will either fail to start or prompt the user to free up some space before proceeding. Verifying administrative access on the device is also a good practice, but it is not necessary for updating firmware. Administrative access is required for installing or uninstalling software applications, but not for updating firmware. Firmware updates are usually provided by the device manufacturer or vendor and do not require user authentication. Exporting the user settings so they can be imported after the upgrade is a precautionary measure, but it is not mandatory for updating firmware. Firmware updates do not usually affect the user settings or data on the device, unless they are incompatible or corrupted. Exporting the user settings can help restore them in case of any problems, but it does not prevent them from occurring.

A custom hosts file is a file that maps hostnames to IP addresses, allowing the user to access websites or servers by their names instead of their numerical addresses. For example, a user can add a line like 192.168.1.100 myserver.local to their hosts file and then access the server by typing myserver.local in their browser. However, this method only works if the IP address of the server does not change. If the server is configured with a dynamic IP address, which means it can be assigned a different IP address by the network router or DHCP server, then the hosts file entry will become invalid and the user will not be able to connect to the server by its hostname. Therefore, the technician should ensure that the server is configured with a static IP address, which means it has a fixed and permanent IP address that does not change. This way, the hosts file entry will always point to the correct IP address of the server and the user will be able to ping the server hostname from their computer.

References:

How to Add a Local DNS Lookup to Hosts File - Help Desk Geek1

Set Custom Domain Name for localhost Website in IIS - TutorialsTeacher.com2

The Official CompTIA A+ Core 1 Student Guide (Exam 220-1101) eBook, page 4-9