220-1101 CompTIA Exam Lab Questions

The power supply unit (PSU) is the component that converts AC power from the outlet to DC power for the computer. If the PSU fails, the computer will not turn on. The CPU, RAM, and GPU are not directly related to the power supply and would not prevent the computer from turning on. 

Since the RAID card does not support hot swapping, the technician needs to shut down the server and check the RAID controller’s status to verify RAID health. S.M.A.R.T. is a feature of hard drives, not RAID cards. Replacing the failed drive while users are connected could cause data loss or corruption. Physically cleaning the HDDs and connectors is unlikely to solve the slow boot time and performance issues. 

The transmit power settings of the access point determine how strong the Wi-Fi signal is. If the transmit power is too low, the Wi-Fi network will have slow connection speeds and poor coverage. If the transmit power is too high, the Wi-Fi network will interfere with other nearby networks and devices, causing congestion and performance issues. Therefore, the technician should check the transmit power settings first and adjust them to an optimal level for the office environment.

References:

•8 Reasons Why Your Internet is Slow (and How to Fix It), section “You have weak Wi-Fi signals”.

•6 Things Slowing Down Your Wi-Fi (And What to Do About Them) - How-To Geek, section “Channel Congestion Dings Wi-Fi Performance”.

One of the possible causes of the error message “No input source” is that the LCD projector is not receiving any signal from the connected device, such as a laptop1. This could be due to a loose or faulty cable or connector, or an incorrect input source selected on the projector2. Therefore, the first troubleshooting step that the technician should take is to check the physical cabling and make sure it is properly connected and secured12.