PDF 220-1101 Study Guide

UEFI stands for Unified Extensible Firmware Interface, and it is a type of firmware that controls the boot process of a computer. UEFI settings allow the technician to configure various aspects of the boot process, such as the boot order, the boot mode, and the security options. If the technician replaces a laptop hard drive with an M.2 SSD, they may need to adjust the UEFI settings to enable the system to detect and boot from the new drive.

DDR5 SDRAM (Double Data Rate 5 Synchronous Dynamic Random-Access Memory) is the latest and fastest type of RAM for desktop workstations as of 2023. DDR5 SDRAM offers higher speeds, lower power consumption, greater capacity, and improved reliability than previous generations of DDR SDRAM. DDR5 SDRAM can operate at frequencies up to 8400 MHz, compared to 3200 MHz for DDR4 SDRAM, which means it can transfer data faster and more efficiently. DDR5 SDRAM also supports dual-channel memory, which allows two memory modules to work together and double the bandwidth. DDR5 SDRAM is compatible with the latest Intel and AMD processors that support the DDR5 standard.

The other options are not as fast or suitable for a desktop workstation. DDR2 SDRAM, DDR3 SDRAM, and DDR4 SDRAM are older and slower types of RAM that have lower frequencies, higher voltages, and lower capacities than DDR5 SDRAM. DDR2 SDRAM, DDR3 SDRAM, and DDR4 SDRAM are not compatible with the latest processors that support DDR5 SDRAM, and require different motherboards and slots. DDR2 SDRAM, DDR3 SDRAM, and DDR4 SDRAM are more suitable for older or budget systems that do not require high performance or memory-intensive applications.

The correct answers are C. Rollers and E. Heating element.

A 3in (2.5cm) point-of-sale printer is a type of thermal printer that uses heat to print receipts on special thermal paper. The printer has a heating element that heats up the paper as it passes through the rollers, creating black marks on the paper where the heat is applied. The heating element and the rollers are two critical components of the thermal printer that can affect the quality of the printout.

If the printer is only printing fully black receipts, it means that the heating element is overheating or malfunctioning, causing the entire paper to turn black. The heating element may need to be replaced or repaired by a technician. Alternatively, the rollers may be dirty or damaged, causing the paper to stick to the heating element and get burned. The rollers may need to be cleaned or replaced by a technician.

The other options are not likely to cause the printer to print fully black receipts. The power supply may affect the printer’s performance, but it would not cause the heating element to overheat or the rollers to malfunction. The humidity and room temperature may affect the quality of the thermal paper, but they would not cause the entire paper to turn black. The fuser is a component of a laser printer, not a thermal printer, and it has no effect on the point-of-sale printer.

The correct answer is A. Install the latest graphics drivers.

The most likely cause of the external monitor not working after an operating system upgrade is that the graphics drivers are incompatible with the new version. Installing the latest graphics drivers from the manufacturer’s website or using Windows Update can resolve this issue. Replacing the monitor, restoring the operating system to the previous version, or reseating the external video adapter are not effective solutions for this problem.