CompTIA 220-1101 Actual Questions

An overheated CPU is the most likely cause of a computer that has been randomly shutting down without warning. A CPU generates heat when it performs calculations, and if the heat is not dissipated properly, it can damage the CPU or cause it to malfunction. A computer that shuts down randomly is a common symptom of an overheated CPU, as the system tries to protect itself from further damage by shutting down or restarting.

The other options are not as likely to cause this issue. A corrupted OS may cause the computer to crash, display errors, or fail to boot, but it does not affect the CPU temperature or the system fan. Incompatible memory modules may cause the computer to beep, display a blue screen, or fail to recognize the installed RAM, but they do not cause the CPU to overheat or the system to shut down randomly. Low system resources may cause the computer to slow down, freeze, or display a low memory warning, but they do not affect the CPU temperature or the system fan.

To troubleshoot and resolve an overheated CPU issue, the user should check and clean the air vents, provide proper ventilation, apply thermal paste, replace the fan or the heat sink, or upgrade the CPU if necessary. The user should also update the BIOS and the device drivers, adjust the power settings, and monitor the system temperature using diagnostic tools.

References:

CompTIA A+ Certification Exam Core 1 Objectives1

The Official CompTIA A+ Core 1 Student Guide (Exam 220-1101) eBook2

How to Troubleshoot Fan Issues | Dell US3

Why your laptop fan is loud and how to fix it | Asurion4

HP Notebook PCs - Fan is noisy and spins constantly (Windows)5

ECC stands for Error Correction Code, which is a type of memory that can detect and correct data errors that may occur during processing or transmission. ECC memory is commonly used in servers that handle sensitive or critical information, such as payment information online, because it can reduce the risk of data corruption, system crashes, or security breaches12.

DDR4 is a generation of DDR technology, which stands for Double Data Rate. DDR4 memory is faster and more power-efficient than its predecessors, but it does not necessarily have ECC functionality. DDR4 memory can be either ECC or non-ECC1.

VRAM is Video RAM, which is a type of memory that is dedicated to storing graphics data for display. VRAM is usually found on graphics cards or integrated graphics processors, not on servers3.

SODIMM is Small Outline DIMM, which is a type of memory module that has a smaller size and lower profile than regular DIMMs. SODIMMs are typically used in laptops, notebooks, or other compact devices, not on servers3.

The correct answer is C. Cat 6.

An RJ45 connector is a standard type of physical connector for network cables. RJ45 connectors are used almost exclusively with Ethernet cables and networking1. Ethernet cables are twisted pair cables that carry data signals between devices on a network, such as computers, routers, switches, and servers2.

There are different categories of Ethernet cables, such as Cat 5, Cat 5e, Cat 6, and Cat 7, that have different specifications and performance levels. Cat 6 is one of the most common types of Ethernet cables, which supports data transfer speeds up to 10 Gbps and bandwidth up to 250 MHz3. Cat 6 cables have four pairs of copper wires, each with a plastic insulation and a foil or braided shield. The wires are twisted together to reduce crosstalk and interference4.

To terminate a Cat 6 cable, an administrator needs to use an RJ45 connector that matches the wiring scheme of the cable. There are two common wiring schemes for Ethernet cables: T568A and T568B. The administrator needs to strip the cable jacket, untwist the wires, arrange them in the correct order according to the chosen scheme, trim the excess wire, and insert them into the RJ45 connector. Then, the administrator needs to use a crimping tool to secure the wires and the connector4.

Optical cables are not terminated with RJ45 connectors, but with different types of connectors that can transmit light signals, such as SC, ST, LC, or MTRJ connectors. Optical cables are used for fiber-optic networks that can carry data over long distances at high speeds.

Serial cables are not terminated with RJ45 connectors, but with different types of connectors that can transmit serial data signals, such as DB9, DB25, or DE9 connectors. Serial cables are used for connecting devices that use serial communication protocols, such as modems, printers, scanners, or keyboards.

USB cables are not terminated with RJ45 connectors, but with different types of connectors that can transmit universal serial bus data signals, such as USB-A, USB-B, USB-C, or Micro-USB connectors. USB cables are used for connecting devices that use USB communication protocols, such as flash drives, cameras, mice, or chargers.

The best option to allow all users to print to the new network printer is to install all applicable print drivers on the print server. This way, the print server can automatically provide the correct driver to the client computers when they connect to the printer. This option also reduces the administrative overhead and security risks of the other options, which involve either granting users more privileges, mapping them to a shared folder, or remotely accessing their computers.

References1 CompTIA A+ Core 1 (220-1101) Certification Study Guide, Chapter 16: Installing and Configuring Printers, page 419.2 The Official CompTIA A+ Core 1 Instructor Guide (Exam 220-1101), Lesson 16: Installing and Configuring Printers, page 16-7.3 CompTIA A+ Core 1 (220-1101) Complete Video Course, Lesson 16: Installing and Configuring Printers, Video 16.2: Installing and Configuring Network Printers.