CompTIA 220-1101 Online Access

The disk failure notice during startup indicates that one or more disks in the RAID array have failed. The machine still seems to startup into Windows but at a much slower speed because the RAID 5 configuration can tolerate one disk failure and still operate, but with reduced performance and reliability. The technician most likely needs to rebuild the RAID, which means replacing the failed disk(s) and restoring the data from the parity information. Reinstalling the HDD drivers will not fix the disk failure. Replacing the failed drivers is not a valid option, as drivers are software, not hardware. Restarting the system will not fix the disk failure either. References:

The issue described suggests that the home USB-C adapter may not be compatible with the laptop or may not meet the necessary power requirements to charge the device. Providing the user with an Original Equipment Manufacturer (OEM) power supply ensures compatibility and reliability, as OEM chargers are specifically designed to work with the laptop model in question. This solution ensures that the user can work efficiently both at home and in the office without facing charging issues, as OEM power supplies adhere to the specific voltage and amperage requirements of the device.References: Hardware 1101.docx, "Power Supplies" section.

The correct answer is B. Check the power supply wattage rating.

A possible cause of the desktop randomly shutting down during operations is that the power supply is not able to provide enough power for the high-end graphics card. The power consumption of today’s graphics cards has increased a lot, and the top models demand between 110 and 270 watts from the power supply1. Therefore, the technician should check the power supply wattage rating and make sure it is sufficient for the graphics card and the rest of the components. Confirming the power supply is grounded, checking whether the power supply is redundant, or confirming the power cables are well connected are not likely to solve this problem.

The most likely cause of the issue is a defective inverter. An inverter is a device that converts the direct current (DC) power from the laptop battery or adapter to the alternating current (AC) power that the LCD backlight bulb needs. The backlight bulb is a fluorescent lamp that illuminates the LCD screen and makes the image visible. If the inverter is defective, it may not provide enough power to the backlight bulb, or it may stop working intermittently. This can result in a dim, dark, or blank screen, even though the LCD panel is still functioning and displaying a faint image.

To troubleshoot a defective inverter, the technician can follow these steps:

Connect an external monitor to the laptop and check if the image is displayed normally. If the external monitor works fine, it means that the laptop video card and driver are not the cause of the issue.

Shine a flashlight into the LCD screen and look for a faint image. If the image is visible, it means that the LCD panel is not the cause of the issue.

Check the inverter cable and connector for any damage, loose connection, or corrosion. The inverter cable is a thin wire that runs from the laptop motherboard to the inverter board, which is usually located at the bottom of the LCD screen. The inverter connector is a small plug that connects the inverter cable to the inverter board. The technician can try to reseat the inverter cable and connector, or replace them if they are faulty.

Check the inverter board for any damage, burn marks, or blown fuses. The inverter board is a small circuit board that contains the inverter and other components. The technician can try to test the inverter board with a multimeter, or replace it if it is defective.

References:

How to fix laptop screen flickering problem - Windows 101

How to Fix a Laptop Screen That’s Flickering, Black, or Has Lines2

How to Fix a Dim Laptop Screen | Techwalla3

How to Test a Laptop Inverter | It Still Works4

How to Replace a Laptop Inverter Board | Chron.com5