PDF LEED-AP-BD+C Study Guide

Decreasing lighting power is a strategy that can be used to reduce the internal load of a building. Internal load is the amount of heat generated within a building by its occupants, equipment, and lighting1. Reducing lighting power can lower the internal heat gain and thus decrease the cooling demand and energy consumption of the building2. Other strategies to reduce internal load include using energy-efficient appliances, natural ventilation, daylighting, occupancy sensors, and shading devices3. References:

8.1: Internal Loads - Engineering LibreTexts

Chapter 3: Design Loads for Residential Buildings - HUD User

Internal Heat Gain - an overview | ScienceDirect Topics

The Indoor Environmental Quality Credit, Interior Lighting, requires the project team to provide individual occupant lighting control for at least 90% of the individual occupant spaces, or at least 50% of the shared multi-occupant spaces. The lighting control must enable occupants to adjust the lighting to suit their individual tasks and preferences, and must have at least three lighting levels, excluding off1. Therefore, a three level (on, 25%, off) lighting control meets the requirements of this credit, while a two level (on, off) lighting control does not. A three level (on, 50%, off) or a three level (on, 75%, off) lighting control may also meet the requirements, depending on the lighting power density and the daylight availability in the space2.

References:

•LEED v4 Reference Guide for Building Design and Construction, Indoor Environmental Quality Credit: Interior Lighting, page 7071

•Interior lighting | U.S. Green Building Council3

The Acoustic Performance credit under the LEED BD+C: Healthcare rating system addresses the acoustic environment in healthcare spaces. It requires strategies that reduce noise levels, control background noise, and provide sound privacy. The documents that would best inform this decision are:

Airport flyover maps: These can help determine the level of external noise intrusion into the building, which can affect the acoustic environment.

Mechanical plans: These can provide information about the location and type of mechanical equipment, which can be a source of internal noise.

Wall sections: These can provide information about the construction of the walls, including materials and assemblies, which can affect sound transmission between spaces1.

References:

Acoustic performance | U.S. Green Building Council

According to the LEED v4: Building Design + Construction Guide, the document that allows a LEED AP to register a project and sign the Certification Agreement is the Owner Confirmation of Agent Authority. This form is used to validate the Certification Agreement when it is signed by someone other than the owner, such as a LEED AP. It provides proof that the owner accepts the conditions in the Certification Agreement and authorizes the LEED AP to act as the owner’s agent for the purpose of LEED project certification1. The other choices are not relevant documents for this purpose. References: LEED Certification Agreement and other legal matters1