Huawei H12-891_V1.0 Questions Answers

The tunnel between VXLAN Layer 2 and Layer 3 gateways is an IPv4 network.

IPv6 over VXLAN solves the problem of insufficient IP address resources for end tenants.

IPv6 Over VLANs do not generate ND table entries.

IPv6 over VXLAN means that the Overlay network of the VXLAN is an IPv6 network.

Metric describes the overhead of this connection

The Link ID represents the local identity of this connection, and the different connection types The Link ID represents different meanings

Data is used to describe additional information for this connection, and different connection types describe different information

Type indicates the type of connection

When you configure Dynamic RP , you need to configure BSR as a backup of the RP.

When you configure a static RP , you need to configure the BSR to advertise the RP information.

When configuring a static RP, you need to specify the information for the RP on all PIM routers.

When you configure Dynamic RP, you do not need to configure BSR.

After modifying the original Stub area to a Totally Stub area, the number of LSAs in the LSDB of each router in the region will definitely be reduced

ASBR cannot be present in either the Stub zone or the Totally Stub zone

When you modify the original Stub area to a Totally Stub region, the number of LSAs propagating within the region will definitely decrease

If there are two ABR in the Totally Stub zone, each ABR sends an LS ID of 0000 to the router in the zone LSA