HCIE-Datacom H12-891_V1.0 Exam Questions and Answers PDF

Comprehensive and Detailed In-Depth Explanation:

OSPFv3, which supports IPv6, uses a router ID that is 32 bits in length, similar to OSPFv2. The router ID in OSPF is always a 32-bit number, typically represented in an IPv4 address format (dotted decimal). Although OSPFv3 is designed to support IPv6, it still relies on a 32-bit router ID for identification, which must be unique within an OSPF domain. The router ID does not change even though the protocol itself supports IPv6 addresses (128 bits).

Intra-Area-Prefix-LSA (Type 9) is used in OSPFv3 to carry IPv6 prefix information for a router or network and is flooded within the area.

Link-LSA (Type 8) is only sent on the local link and is not flooded throughout the area.

Inter-Area-Prefix-LSA (Type 3) and Inter-Area-Router-LSA (Type 4) are also flooded within an area but originate from ABRs, typically for cross-area route advertisement.

That said, Intra-Area-Prefix-LSA is specifically flooded within an area, matching the context of the question directly.

Exact Extract - Huawei HCIE-Datacom OSPFv3 Module:

“Intra-Area-Prefix-LSAs are flooded within the area and advertise the IPv6 prefixes associated with router and network LSAs.”

When selecting core devices for a WAN in enterprise networks, considerations typically include:

Service volume: Ensures the core device can handle expected traffic.

Physical location: Important for latency, redundancy, and network design.

Node quantity: Affects topology, scalability, and routing complexity.

Device naming conventions, however, are purely administrative and do not affect the functional selection of core devices.

Correct answer: A. Device naming conventions

Comprehensive and Detailed In-Depth Explanation:

BGP4+ (BGP for IPv6) uses the MP_REACH_NLRI (Multiprotocol Reachable Network Layer Reachability Information) attribute to advertise IPv6 routes. This attribute is part of BGP ' s multiprotocol extensions (RFC 2858), allowing BGP to support multiple address families, including IPv6.

MP_REACH_NLRI: Advertises reachable IPv6 prefixes along with next-hop information.

MP_UNREACH_NLRI: Used to withdraw previously advertised IPv6 routes.

Since IPv6 addresses are significantly different from IPv4 addresses in structure and length (128 bits), the traditional BGP update message format (which supports only IPv4) is insufficient. The MP_REACH_NLRI attribute solves this by carrying IPv6-specific information.