Pass H12-891_V1.0 Exam Guide

Huawei IPsec supports multiple modes for establishing Security Associations (SAs):

A. Template negotiation — Used in IPsec policy templates and dynamic VPNs.

B. IKE auto-negotiation mode — Automatically negotiates parameters via IKE Phase 1/2.

C. Certificate negotiation — IPsec peers can authenticate each other using certificates during IKE negotiation.

D. Manual mode — Static IPsec SAs can be manually configured without IKE, often used in simple or static topologies.

Exact Extract - Huawei Security Configuration Guide (USG Series):

“IPsec SAs can be established manually or dynamically through IKE, including using PSKs or certificates. Template-based approaches simplify large-scale deployment.”

The basic constructs in YANG data modeling include:

Leaf node – A single data element with a specific type (e.g., integer, string).

List node – A repeating set of elements, each structured the same.

Incorrect options:

A. Set node – ❌ Not a valid YANG construct.

D. Tree node – ❌ Not an individual data model element. The entire model forms a tree structure, but there is no “tree node” in YANG syntax.

Exact Extract – Huawei YANG Modeling Fundamentals:

“YANG defines elements such as leaf, list, container, choice, and leaf-list. ' Set ' and ' tree ' are not YANG node types.”

Comprehensive and Detailed In-Depth Explanation:

The IP prefix list configuration:

ip ip-prefix TEST permit 10.0.0.0 24 less-equal 30

10.0.0.0/24: Matches because it falls within the 10.0.0.0/24 prefix with the same prefix length (24).

10.0.1.0/24: Matches because it also falls within the /24 network range.

10.0.2.0/24: Matches for the same reason as the above.

10.0.0.1/30: Matches because it falls within the /24 prefix and its subnet length (30) is within the less-equal 30 range.

The prefix list permits any route that falls within the 10.0.0.0/24 network with a subnet mask ranging from /24 to /30. Therefore, all given routes are matched.

In OSPFv3 (used for IPv6), Link LSAs (Type 8) are not advertised throughout the entire area. Instead, they are only advertised on a specific link (i.e., the local link). This differs from OSPFv2, where LSAs like Type 1 or Type 2 are advertised across the area.

Exact Extract - Huawei HCIE-Datacom V1.0 Courseware - Chapter: OSPFv3 Operation

“Link LSAs are generated by routers for each attached link and sent only on that link, not flooded throughout the area.”