CIDQ IDPX Online Access

The NCIDQ IDPX exam tests the designer’s knowledge of fire safety requirements, specifically those outlined in the International Building Code (IBC), which is referenced for determining fire ratings of building components. A fire separation wall with a 2-hour rating requires doors that meet specific fire resistance standards.

IBC Requirements:According to the IBC (2018 Edition), Section 716.5, the fire rating of a door (fire door) in a fire-rated wall must be at least 3/4 of the wall’s rating, with a minimum rating of 45 minutes (3/4-hour) and a maximum requirement of 3 hours. For a 2-hour fire-rated wall:

3/4 of 2 hours = 1.5 hours (1 1/2 hours).

Therefore, the door must have a minimum fire rating of 1 1/2 hours.

Option A (3/4-hour):A 3/4-hour (45-minute) rating is the minimum for doors in 1-hour fire-rated walls, not 2-hour walls, so this is insufficient.

Option B (1-hour):A 1-hour rating is also insufficient, as it does not meet the 3/4 requirement for a 2-hour wall (1.5 hours).

Option C (1 1/2-hours):This meets the IBC requirement of 3/4 of the wall’s rating (1.5 hours) for a 2-hour fire separation wall, making it the correct minimum fire rating for the door.

Option D (2-hours):While a 2-hour rating exceeds the minimum requirement, it is not necessary, as the IBC allows a 1 1/2-hour rating for a 2-hour wall. A 2-hour rated door may be used but is not the minimum required.

Verified Answer from Official Source:

The correct answer is verified from the International Building Code, as referenced in NCIDQ IDPX study materials.

“Fire door assemblies in fire walls or fire barriers with a fire-resistance rating greater than 1 hour but less than 4 hours shall have a minimum fire-protection rating of 1 1/2 hours.” (International Building Code, 2018 Edition, Section 716.5, Table 716.5)

The IBC specifies that for a 2-hour fire-rated wall, the minimum fire rating for a door is 1 1/2 hours, as outlined in Table 716.5. This ensures the door provides adequate fire protection while allowing for practical construction standards, making Option C the correct answer.

Objectives:

Understand fire rating requirements for building components (NCIDQ IDPX Objective: Codes and Standards).

Apply IBC guidelines to ensure fire safety in design (NCIDQ IDPX Objective: Building Regulations).

Acoustical privacy in a conference room requires minimizing sound transmission between spaces, particularly through walls, ceilings, and other structural elements. According to NCIDQ IDPX principles, the primary method to achieve this is by ensuring that sound cannot easily travel through gaps or flanking paths in the construction assembly.

Option A (Specify interior partitions to the underside of the deck above, add fiberglass insulation to partitions):This option is the most effective because extending partitions to the underside of the deck above eliminates gaps at the top of the partition, which are common flanking paths for sound. Adding fiberglass insulation within the partition further absorbs sound, increasing the wall’s Sound Transmission Class (STC) rating. This method ensures a continuous barrier against airborne sound transmission, which is critical for acoustical privacy in a conference room.

Option B (Specify an acoustical ceiling tile, insulate and caulk joints between partition and ceiling and at electrical receptacles):While acoustical ceiling tiles can absorb sound within the room, they do not significantly reduce sound transmission between rooms unless the partition extends above the ceiling to the deck. Insulating and caulking joints helps, but this method is less effective than Option A because sound can still travel through the ceiling plenum.

Option C (Specify interior partitions to 6" [152 mm] above an acoustical ceiling, specify batt insulation over the top, 24" [610 mm] each side):This option is less effective because the partition does not extend to the deck above, leaving a gap in the plenum where sound can travel. The batt insulation over the top helps, but it does not provide a complete barrier to sound transmission.

Option D (Specify metal stud partitions to the underside of the deck above, 5/8" [16 mm] fire-rated gypsum board covered with Type II vinyl wallcovering):While extending the partition to the deck above is good, the addition of Type II vinyl wallcovering does little to improve acoustical privacy, as it primarily serves an aesthetic and durability purpose rather than sound absorption or transmission reduction. Fiberglass insulation (as in Option A) would be more effective for sound control.

Verified Answer from Official Source:

The correct answer is verified from NCIDQ’s official study materials, specifically related to acoustical design principles for interior spaces.

“Partitions should extend to the underside of the structural deck above to prevent sound transmission through the plenum. Adding insulation within the partition cavity enhances the STCrating.” (NCIDQ IDPX Study Guide, Acoustical Design Section)

The NCIDQ IDPX Study Guide emphasizes that for effective acoustical privacy, partitions must extend to the structural deck to block sound transmission paths. Fiberglass insulation within the partition cavity absorbs sound, reducing transmission between spaces, which aligns with Option A.

Objectives:

Understand the principles of acoustical design and sound transmission control (NCIDQ IDPX Objective: Acoustical Design).

Apply construction detailing to achieve acoustical performance in interior spaces (NCIDQ IDPX Objective: Detailing and Construction).

The NCIDQ IDPX exam tests the designer’s knowledge of sustainable design and material safety, particularly regarding chemicals of concern in building products. Formaldehyde, PVC (polyvinyl chloride), and phthalates are chemicals often targeted in sustainable design due to their environmental and health impacts.

Option A (The Red List):This is the correct choice. The Red List, developed by the International Living Future Institute as part of the Living Building Challenge, identifies chemicals and materials that are harmful to human health and the environment and should be avoided in building projects. Formaldehyde (a known carcinogen), PVC (which can release toxins during production and disposal), and phthalates (endocrine disruptors often used in plastics) are all on the Red List due to their toxicity and environmental impact.

Option B (Class C finishes):Class C finishes refer to a fire classification for interior finishes based on flame spread and smoke development (e.g., per ASTM E84). This classification is unrelated to chemical composition or toxicity.

Option C (Hazardous building types):There is no standard category called “hazardous building types” in building codes or design standards. This option is incorrect and not a recognized term.

Option D (CAL 133 compliant products):CAL 133 (California Technical Bulletin 133) is a flammability standard for furniture, requiring resistance to open flame ignition. It focuses on fire safety, not the presence of harmful chemicals like formaldehyde, PVC, or phthalates.

Verified Answer from Official Source:

The correct answer is verified from NCIDQ’s official study materials on sustainable design and material health.

“The Red List includes chemicals such as formaldehyde, PVC, and phthalates, which are identified as harmful to human health and the environment and should be avoided in sustainable design.” (NCIDQ IDPX Study Guide, Sustainable Design Section)

The NCIDQ IDPX Study Guide confirms that formaldehyde, PVC, and phthalates are part of the Red List, a tool used in sustainable design to avoid toxic materials. This aligns with Option A, making it the correct answer.

Objectives:

Understand the Red List and its role in sustainable design (NCIDQ IDPX Objective: Sustainable Design).

Apply material health knowledge to select safe products (NCIDQ IDPX Objective: Materials and Finishes).

The NCIDQ IDPX exam tests the designer’s understanding of the programming phase, particularly for a project involving the conversion of an existing space. Programming involves gathering information to define the project’s requirements, and for an existing building conversion, understanding the current conditions is critical.

Option A (Identify building codes):Identifying building codes is important, but it is typically done during the schematic design phase or later, after programming establishes the project’s needs. It is not the most important programming activity.

Option B (Prepare record (as-built) drawings):This is the correct choice. For a conversion project, the most important programming activity is to prepare record (as-built) drawings of the existing retail facility. These drawings document the current conditions (e.g., walls, columns, utilities), providing a baseline for planning the new office layout. Without accurate as-built drawings, the designer cannot effectively program the space or proceed with design.

Option C (Calculate the number of parking spaces):Calculating parking spaces is a code-related task that occurs later, typically during schematic design or permitting, after programming defines the office’s occupancy and needs.

Option D (Determine which consultants are required):While determining consultants (e.g., structural engineer, MEP engineer) is important, it is a secondary step that follows after understanding the existing conditions through as-built drawings.

Verified Answer from Official Source:

The correct answer is verified from NCIDQ’s official study materials on programming for existing building conversions.

“For a project involving the conversion of an existing space, the most important programmingactivity is to prepare record (as-built) drawings to document the current conditions and inform the design process.” (NCIDQ IDPX Study Guide, Programming Section)

The NCIDQ IDPX Study Guide emphasizes that preparing as-built drawings is the most critical programming activity for a conversion project, as it provides the foundation for understanding the existing space. This aligns with Option B, making it the correct answer.

Objectives:

Understand programming activities for existing building conversions (NCIDQ IDPX Objective: Programming).

Apply documentation to inform design decisions (NCIDQ IDPX Objective: Project Planning).