Download Full Version SK0-005 CompTIA Exam

The server’s local storage is experiencing problems. Only two out of four drives are found, and an additional hard drive connects and disconnects randomly.

Likely Cause: The most probable cause is a faulty power supply (Option B). Here’s why:

When a power supply is failing or not providing sufficient power, it can lead to intermittent connectivity issues with drives.

Drives may not be recognized during boot or may disconnect randomly due to power fluctuations.

RAM, CPU, and cooling failures typically result in different symptoms (e.g., blue screens, system instability, or overheating), which do not match the described issue.

Link aggregation is the best option to implement on the new server to ensure the least amount of network downtime but a good amount of network speed. Link aggregation is a technique of combining multiple physical network interfaces into one logical interface to increase bandwidth, redundancy, and load balancing. Link aggregation can improve the performance and availability of the server by allowing it to use more than one network path for data transmission and failover in case of link failure. Link aggregation can be implemented using various protocols, such as IEEE 802.3ad (LACP), Cisco EtherChannel, or Linux bonding. References: [CompTIA Server+ Certification Exam Objectives], Domain 4.0: Networking, Objective 4.1: Given a scenario, configure network settings for servers.

When a server crashes with a Blue Screen of Death (BSOD) and is not responding, the most effective way to reboot it remotely must be chosen:

Crash cart (A): A crash cart is a physical device used for troubleshooting at the server location. Since the administrator wants a remote reboot, this is not suitable.

KVM (B): A KVM (Keyboard, Video, Mouse) switch allows remote management of multiple servers but does not inherently provide reboot capabilities.

IRMI (C) - Intelligent Remote Management Interface: This is the best option. Many enterprise servers have Intelligent Platform Management Interface (IPMI) or Integrated Lights-Out (iLO) management tools that allow remote power control, including forced reboots.

shutdown -r (D): This command is used to restart a server via an operating system command-line interface. However, since the server is not responding, this command cannot be executed.

Since the server is unresponsive, the best method is to use the remote management interface (IRMI/IPMI/iLO) to force a reboot.

Comprehensive and Detailed Explanation:

A sudden increase in fan noise without any changes in temperature or server workload is typically due to a defective fan.

If one fan fails, the remaining fans will automatically increase their speed to compensate for the loss, leading to increased noise levels.

Servers use intelligent fan control systems, which monitor temperature and fan health. If a fan stops functioning properly, the others will ramp up to maintain adequate cooling.

This issue can be resolved by inspecting and replacing the defective fan to restore normal cooling operation.