SK0-005 Exam Dumps : CompTIA Server+ Certification Exam

RAID 6 is a type of RAID level that uses two parity blocks to provide fault tolerance and redundancy for data storage. RAID 6 can withstand the failure of up to two disks in the array without losing any data. RAID 6 requires a minimum of four disks to operate, and it distributes the data and parity blocks across all the disks in the array. RAID 6 has a high write penalty, which means that it takes more time and resources to write data to the disks than to read data from them. However, RAID 6 offers a high level of data protection and reliability, which makes it suitable for applications that require high availability and durability1.

RAID 1 provides redundancy and fault tolerance by mirroring the data from one disk to another disk. RAID 1 offers high read performance and data security, but it has low capacity and write performance. RAID 1 requires a minimum of two disks to operate, and it can only tolerate the failure of one disk in the array. If more than one disk fails, all the data in the array is lost2.

RAID 5 provides redundancy and fault tolerance by using one parity block to store information that can be used to reconstruct the data in case of a disk failure. RAID 5 requires a minimum of three disks to operate, and it distributes the data and parity blocks across all the disks in the array. RAID 5 offers a balance between performance, capacity, and data protection, but it can only tolerate the failure of one disk in the array. If more than one disk fails, all the data in the array is lost2.

Therefore, among these options, RAID 6 is the best solution for creating a data volume out of four disks with the most redundancy.

An action that the administrator should take to harden the hardware of a new server is to set a BIOS password. BIOS (Basic Input/Output System) is a firmware that initializes the hardware components and settings of a system before loading the operating system. BIOS password is a security feature that requires a user to enter a password before accessing or modifying the BIOS settings or booting up the system. By setting a BIOS password, the administrator can prevent unauthorized or malicious users from changing the hardware configuration or boot order of the server.

References: CompTIA Server+ SK0-005 Certification Study Guide, Chapter 5, Lesson 5.1, Objective 5.1

RAID (Redundant Array of Independent Disks) is a technology that combines multiple hard drives into a logical unit that provides improved performance, reliability, or capacity. RAID can be implemented by hardware, software, or a combination of both. Hardware RAID uses a dedicated controller to manage the RAID array, while software RAID uses the operating system or a driver to do the same1.

In this scenario, the technician noted that the RAID hard drives were functional while troubleshooting a motherboard failure. This means that the data on the drives was not corrupted or lost. However, the technician installed a spare motherboard with similar specifications and used the original components. This means that the new motherboard may not have the same RAID configuration as the old one, or it may not recognize the existing RAID array at all. Therefore, the technician needs to reconfigure the RAID in order to restore operations with minimal downtime.