Download Full Version H12-831_V1.0 Huawei Exam

Comprehensive and Detailed In-Depth Explanation:

Understanding Port Isolation in the Network

Network Setup Details:

The switch is Layer 3, with VLANIF10 configured as 10.1.1.1/24 (gateway for all PCs).

All PCs are in VLAN 10 and use 10.1.1.1 as the default gateway.

Port isolation is enabled on switch interfaces, dividing them into two groups:

Group 1 (PC1 & PC2): GigabitEthernet0/0/1 and GigabitEthernet0/0/2

Group 2 (PC3 & PC4): GigabitEthernet0/0/3 and GigabitEthernet0/0/4

Port Isolation Behavior:

Ports within the same isolation group CAN communicate with each other.

Ports from different isolation groups CANNOT communicate directly.

All devices CAN still communicate with the L3 switch (10.1.1.1), which acts as the gateway.

Ping Analysis from PC1 (10.1.1.2)

Destination IP

Device

Connected Port

Isolation Group

Ping Result from PC1

10.1.1.3

PC2

GigabitEthernet0/0/2

Group 1

✅ Can Ping

10.1.1.4

PC3

GigabitEthernet0/0/3

Group 2

❌ Cannot Ping

10.1.1.5

PC4

GigabitEthernet0/0/4

Group 2

❌ Cannot Ping

10.1.1.1

L3 Switch (Gateway)

N/A

Not Isolated

✅ Can Ping

Which IPs Cannot be Pinged from PC1?

PC3 (10.1.1.4) and PC4 (10.1.1.5) are in a different isolation group (Group 2), so PC1 cannot reach them directly.

PC2 (10.1.1.3) is in the same isolation group (Group 1), so PC1 can ping it.

PC1 can ping the gateway (10.1.1.1) because the switch is Layer 3 and forwards traffic.

Thus, the correct answers are: A. 10.1.1.3 and D. 10.1.1.4.

Final Conclusion:

✅ PC1 CAN ping:

10.1.1.3 (PC2, same isolation group)

10.1.1.1 (Gateway, L3 Switch)

❌ PC1 CANNOT ping:

10.1.1.4 (PC3, different isolation group)

10.1.1.5 (PC4, different isolation group)

Thus, the correct answer is: A. 10.1.1.3 and D. 10.1.1.4.