Special Summer Sale 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: save70

Vce H12-831_V1.0 Questions Latest

Page: 6 / 10
Total 156 questions

HCIP-Datacom-Advanced Routing & Switching Technology V1.0 Questions and Answers

Question 21

On the OSPF network shown in the figure, the cost values of links are marked. IS-IS Auto FRR is enabled on R1. The primary path from R1 to 10.0.3.3/32 is R1 → R2 → R3, and the backup path is R1 → R4 → R2 → R3.

Is this statement TRUE or FALSE?

Options:

A.

TRUE

B.

FALSE

Question 22

On the network shown in the figure, IS-IS runs on R1, R2, R4, and R5, and the area ID is 49.0001. IS-IS runs on R3 and R6, and the area ID is 49.0002. In AS 65000, R1, R3, R4, and R6 each establish iBGP peer relationships with R2 and R5. R2 and R5 are RRs (Route Reflectors), and R1, R4, R3, and R6 are clients. The iBGP peer relationships are established using Loopback0 on each router, and the router ID is 10.0.0.X/32, where X is the number of the router. R1 and R4 import the external route 192.168.1.0/24 to BGP through the import-route command, and R3 and R6 import the external route 192.168.2.0/24 to BGP through the import-route command. Which of the following statements are true?

Options:

A.

The routing table of R4 contains two equal-cost default routes.

B.

The route 192.168.1.0/24 in the routing table of R3 has two next hops.

C.

The routing table of R1 does not contain the route 192.168.2.0/24.

D.

For 192.168.1.0/24, R3 preferentially selects the BGP route received from R2, and R6 preferentially selects the BGP route received from R5.

Question 23

On the network shown in the figure, OSPF is deployed on R1 and R2. IS-IS is deployed on R2 and R3. To enable R1 to obtain the route to 10.0.3.3/32, ISIS routes are imported into OSPF on R2. In this case, the next hop address to 10.0.3.3/32 in the routing table of R1 is_____.

Options:

Question 24

Both VLAN aggregation and MUX VLAN are deployed on the enterprise network shown in the figure.

    All switch interfaces connected to terminals are access interfaces.

    Given this, match PC1 to PC4 with the hosts or servers they can access on the network.

(Note: A host cannot be matched with itself. For example, PC1 cannot match PC1. Tokens can be reused.)

Options:

Page: 6 / 10
Total 156 questions