Pass Using LEED-Green-Associate Exam Dumps

LEED certification is awarded based on the number of points a project earns across several categories of green building performance. The range of points required to maintain Gold level of LEED certification is 60-79, out of a possible 110 points. The other levels of LEED certification are: Certified (40-49 points), Silver (50-59 points), and Platinum (80 or more points)13. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide3

receptacle load is the electrical load that is connected to the building’s electrical system through receptacles (also known as outlets or sockets). Receptacle load includes both regulated and non-regulated loads, such as computers, printers, monitors, lamps, refrigerators, microwaves, coffee makers, etc. Receptacle load does not include hard-wired equipment, such as lighting fixtures, HVAC systems, or elevators12.

Receptacle load is one of the major components of plug and process loads (PPLs), which consume about 47% of primary energy in U.S. commercial buildings2. Reducing receptacle load can help improve building energy efficiency and achieve LEED certification. One of the strategies to reduce receptacle load is to use automatic receptacle controls, which are devices that turn off or reduce power to receptacles when they are not in use. Automatic receptacle controls are required by ANSI/ASHRAE/IES Standard 90.1-2019: Energy Standard for Buildings Except Low-Rise Residential Buildings, as well as NIH DRM 10.5.313.

Installing concrete sidewalks and parking areas will increase the quantity of the rainwater that is discharged from a site. Rainwater is the water that falls as precipitation on a site. Rainwater discharge is the amount of rainwater that leaves a site as surface runoff or subsurface flow. Rainwater discharge can affect the quantity and quality of water resources downstream by causing erosion, flooding, sedimentation, pollution, and habitat loss. Concrete sidewalks and parking areas are examples of impervious surfaces that prevent rainwater from infiltrating into the soil and increase rainwater discharge by creating more runoff1 . References: LEED v4 Green Associate Candidate Handbook1, EPA’s Stormwater Management