Full Access USGBC LEED-Green-Associate Tutorials

Recycling is the term for collecting, reprocessing, marketing and using materials that are diverted or recovered from the solid waste stream. Recycling is a process that transforms waste materials into new products that can be used for different purposes. Recycling reduces the amount of waste sent to landfills or incinerators, conserves natural resources, saves energy, and reduces greenhouse gas emissions. The LEED Green Associate Candidate Handbook states that one of the intents of the Materials and Resources category is to “reduce waste through recycling during construction and occupancy” [1, p. 15]. References: LEED Green Associate Candidate Handbook, [Recycling Basics | U.S. Environmental Protection Agency]

Rainwater is the type of water that would be most useful for landscape irrigation when considering water conservation and water efficient landscaping. Rainwater is water that falls from the sky as precipitation, and it can be collected and stored in tanks, barrels, cisterns, or ponds for later use1. Rainwater is a renewable and free source of water that does not require any treatment or pumping, unlike potable water, which is water that is safe for human consumption and often comes from municipal sources2. Potable water is a scarce and valuable resource that should be conserved for drinking,cooking, and hygiene purposes, rather than for irrigation2. Clean water is a vague term that can refer to any water that is free of contaminants, but it does not necessarily mean that it is potable or suitable for irrigation3. Blackwater is water that contains human or animal waste, such as sewage or toilet water, and it poses a health and environmental risk if used for irrigation without proper treatment4. Therefore, rainwater is the best option for landscape irrigation, as it reduces the demand for potable water, lowers the utility bills, and benefits the plants and soil1.

Rainwater Harvesting for Landscape Irrigation

Potable Water

Clean Water

Blackwater

impervious surfaces are those that do not allow water to infiltrate into the soil, such as asphalt, concrete, roofs, or compacted soil. Impervious surfaces increase the amount and speed of stormwater runoff, which can cause erosion, sedimentation, flooding, and pollution of downstream water bodies. Minimizing impervious surfaces can help reduce these negative impacts and preserve the aquatic habitat and natural stream morphology12.

Native vegetation is the plant life that is adapted to the local climate and soil conditions. Native vegetation can help filter pollutants, stabilize soils, reduce runoff, provide shade, and create habitat for wildlife. Enhancing native vegetation can help restore the natural functions and diversity of the ecosystem and protect the aquatic habitat and natural stream morphology13.

Rainwater is the precipitation that falls on the site. Rainwater can be captured and reused for various purposes, such as irrigation, toilet flushing, or cooling. Capturing and reusing rainwater can help reduce potable water demand, decrease stormwater runoff, and prevent flooding and pollution of downstream water bodies. Capturing and reusing rainwater can help conserve water resources and protect the aquatic habitat and natural stream morphology1 .

These strategies are consistent with the LEED v4 requirements for the Sustainable Sites credit category, which aims to protect and restore habitat, manage stormwater, reduce heat island effects, and promote alternative transportation.