Easter Sale 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: save70

Online 300-410 Questions Video

Page: 39 / 45
Total 594 questions

Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) Questions and Answers

Question 153

Refer to the exhibit.

AS65510 iBGP is configured for directly connected neighbors. R4 cannot ping or traceroute network 192 168.100.0/24 Which action resolves this issue?

Options:

A.

Configure R4 as a route reflector server and configure R1 as a route reflector client

B.

Configure R1 as a route reflector server and configure R2 and R3 as route reflector clients

C.

Configure R4 as a route reflector server and configure R2 and R3 as route reflector clients.

D.

Configure R1 as a route reflector server and configure R4 as a route reflector client

Question 154

Refer to exhibit.

Routing protocols are mutually redistributed on R3 and R1. Users report intermittent connectivity to services hosted on the 10.1.1.0/24 prefix. Significant routing update changes are noticed on R3 when the show ip route profile

command is run. How must the services be stabilized?

Options:

A.

The issue with using BGP must be resolved by using another protocol and redistributing it into EIGRP on R3

B.

The routing loop must be fixed by reducing the admin distance of iBGP from 200 to 100 on R3

C.

The routing loop must be fixed by reducing the admin distance of OSPF from 110 to 80 on R3

D.

The issue with using iBGP must be fixed by running eBGP between R3 and R4

Question 155

Refer to the exhibits. An engineer filtered messages based on severity to minimize log messages. After applying the filter, the engineer noticed that it filtered required messages as well. Which action must the engineer take to resolve the issue?

Options:

A.

Configure syslog level 2.

B.

Configure syslog level 3.

C.

Configure syslog level 4.

D.

Configure syslog level 5.

Question 156

Refer to Exhibit.

A network administrator enables DHCP snooping on the Cisco Catalyst 3750-X switch and configures the uplink port (Port-channel2) as a trusted port. Clients are not receiving an IP address, but when DHCP snooping is disabled, clients start receiving IP addresses. Which global command resolves the issue?

Options:

A.

No ip dhcp snooping information option

B.

ip dhcp snooping

C.

ip dhcp relay information trust portchannel2

D.

ip dhcp snooping trust

Page: 39 / 45
Total 594 questions