PDF 4A0-112 Study Guide

When a router receives a CSNP (Complete Sequence Number PDU) that references an older LSP (Link-State PDU) than the one in its local database, it indicates that the neighbor is missing newer information.

In response, the router sends back a PSNP (Partial Sequence Number PDU) to the neighbor, which includes a copy of the LSPs it has in its local database that the neighbor may not yet have. This helps to synchronize the link-state information between routers.

In this scenario, the routers are configured with an Equal-Cost Multi-Path (ECMP) value of 4, meaning they can utilize up to 4 equal-cost paths to reach a destination. Since Router R5 is advertising the 192.168.3.0/24 prefix and all links have the same cost, router R3 will receive multiple routes to reach this destination.

Given that all the routers (R1, R2, R3, R4, and R5) are connected in a way that can support multiple equal-cost paths, and assuming ECMP is set to 4, the routing table on Router R3 will have up to 4 entries for the prefix 192.168.3.0/24.

Thus, Router R3's routing table will contain4 entriesfor the prefix 192.168.3.0/24.

Typically, interfaces on a Nokia 7750 SR router are not configured in pairs on the same subnet for redundancy. Instead, redundancy is achieved through mechanisms like Virtual Router Redundancy Protocol (VRRP) or other high availability protocols, not by simply using interfaces in pairs on the same subnet.

From R1 to R7: The path will be R1 → R2 → R4 → R6 → R7 because this path has the least cumulative metric of 10 + 10 + 10 + 10 = 40.

From R7 to R1: The reverse path will follow R7 → R6 → R4 → R2 → R1 because it is the shortest return path with the same metrics.