Pre-Summer Special - Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: top65certs

Newly Released Cisco 300-425 Exam PDF

Page: 11 / 15
Total 196 questions

Designing Cisco Enterprise Wireless Networks (ENWLSD) Questions and Answers

Question 41

An engineer is designing a network deployment for a college with six buildings Each building must have a WLC located in the IDF to support the APs. The wireless clients should be able to roam between the APs and the controllers. Which type of wireless architecture should be used?

Options:

A.

Distributed

B.

Centralized

C.

Cloud

D.

Autonomous

Question 42

A wireless deployment in a high-density environment is being used by vendors to process credit card payment transactions via handheld mobile scanners. The scanners are having problems roaming between access points in the environment. Which feature on the wireless controller should have been incorporated in the design?

Options:

A.

RX SOP

B.

802.11w

C.

AP Heartbeat Timeout

D.

Application Visibility Control

Question 43

A customer called with a requirement that internal clients must be on different subnets depending on the building they are in. All access points are operating in local mode and will not be modified, and this is a single controller solution. Which design approach creates the desired result?

Options:

A.

Create AP groups for each desired location, map the correct VLANs to the internal SSID, and add the access points for that location.

B.

Create an SSID place it to the desired VLAN under WLANs and configure 802.1x in ISE to assign the correct VLAN based on the SSID from which the client is authenticating

C.

Create FlexConnect groups, place the access points in, and set the correct VLAN to SSID mapping based on location.

D.

Create mobility anchors for the SSID and on the controller under the internal SSID create a foreign map to the desired VLAN based on location.

Question 44

Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?

Options:

A.

UDP 16666 for control plane, EoIP (IP protocol 97) for data plane

B.

UDP 16668 for control plane, UDP 16667 for data plane

C.

UDP 16667 for control plane, UDP 16666 for data plane

D.

UDP 16666 for control plane, UDP 16667 for data plane

Page: 11 / 15
Total 196 questions