CCNP Enterprise 300-425 Cisco Study Notes

When performing a Layer 1 survey using Metageek Chanalyzer, the Cisco CleanAIR AP should be configured in Monitor mode. This mode allows the AP to scan the environment for interference without serving clients.

The data path being down while the control path is up indicates an issue with the data plane security configuration. The data-dtls setting on the AireOS 5520 WLC is responsible for enabling Datagram Transport Layer Security (DTLS) for the data plane, which encrypts the data traffic between the controllers. If this setting is disabled, the data path cannot be established securely, leading to the observed issue. Therefore, enabling data-dtls on the AireOS 5520 WLC is necessary to resolve the data path downtime.

 For Stateful Switchover (SSO) to function correctly, the redundancy ports on both the primary and secondary controllers must be directly connected. This allows for the necessary state and configuration information to be synchronized between the two controllers, preventing the secondary controller from entering maintenance mode in the event of a failover.

 In an office environment with cubicles, signal propagation is most commonly affected by absorption. This is because the materials used in cubicle walls, such as fabric and other dense substances, tend to absorb the radio frequency (RF) signals used in WLANs, leading to attenuation.