HCIA-Datacom H12-811_V1.0 Exam Questions and Answers PDF

To enable an FTP server on a Huawei router, the following commands are required:

Create the FTP user and set the allowed service:

local-user huawei service-type ftp

Set the FTP user's password:

local-user huawei password cipher huawei

Specify the root directory for FTP access:

local-user huawei ftp-directory flash:/dhcp/

Enable the FTP server function:

ftp server enable

Since all four commands are required, the correct answers are A, B, C, and D.

An Ethernet II frame has a standard length range of 64 to 1518 bytes, including the Ethernet header. This range accounts for both the minimum frame size (to prevent collisions) and the maximum frame size (to avoid excessive delay). This specification is in line with IEEE 802.3 standards for Ethernet frames​.

Comprehensive and Detailed Explanation:

802.11n operates on both 2.4 GHz and 5 GHz bands (Dual-band support). ✅

802.11ax (Wi-Fi 6) supports 6 GHz (but 802.11n does not). ❌

✅ Reference: HCIA-Datacom Wireless Guide – 802.11 Standards

To help Fit APs locate an AC (Access Controller), the DHCP server must provide the AC IP address using DHCP Option 43.

Option 55 (Incorrect): Used to request a list of DHCP options.

Option 82 (Incorrect): Used for Relay Agent Information, not AC discovery.

Option 10 (Incorrect): Not relevant for APs or CAPWAP.

Option 43 (Correct): This option delivers the AC IP address to Fit APs so they can establish a CAPWAP tunnel.

Thus, the correct answer is D.