Free HPE3-U01 Questions Attempt

An omnidirectional antenna is an antenna that radiates almost equal power in all directions in the horizontal plane, which is also called the azimuth plane1. This means that the antenna has a 360-degree coverage in the horizontal plane, but a narrow coverage in the vertical plane, which is also called the elevation plane2. An omnidirectional antenna is suitable for indoor environments where the clients are distributed around the access point3. Therefore, statement D accurately describes an omnidirectional antenna. Statements A, B, and C are incorrect because they describe different types of antennas. Statement A describes an isotropic antenna, which is a theoretical antenna that radiates equal power in all directions in both the horizontal and vertical planes. Statement B describes a vertical antenna, which is an antenna that radiates almost equal power in all directions in the vertical plane, but a narrow coverage in the horizontal plane. Statement C describes a directional antenna, which is an antenna that radiates more power in a specific angle and less power in others, creating a focused beam of radio waves. References: 1: Aruba Certified Network Technician (ACNT) Study Guide, page 872: Aruba Certified Network Technician (ACNT) Study Guide, page 883: Aruba Certified Network Technician (ACNT) Study Guide, page 89. : Aruba Certified Network Technician (ACNT) Study Guide, page 87. : Aruba Certified Network Technician (ACNT) Study Guide, page 88. : Aruba Certified Network Technician (ACNT) Study Guide, page 89.

 The 5 GHz band is a radio frequency band used for Wi-Fi communications. It has a higherdata bandwidth than the 2.4 GHz band, but a shorter range and less penetration through walls. The 5 GHz band is divided into several sub-bands, each with a different set of channels. One of these sub-bands is the U-NII-3 band, which covers the frequency range from 5725 MHz to 5850 MHz. This sub-band contains 24 non-overlapping channels, numbered from 149 to 172. Channels 149 to 161 are part of the 5 GHz band and can be used for Wi-Fi communications. Channels 165 and 169 are restricted to indoor use only, and channel 173 is not allowed in some regions. Channels 12, 13, and 14 are not part of the 5 GHz band, but belong to the 2.4 GHz band, which has a different set of channels and regulations. U-NII-5 is not a valid sub-band name, but a proposed extension of the 5 GHz band to include the frequency range from 5925 MHz to 7125 MHz. This extension is not yet approved or implemented, and therefore not part of the 5 GHz band. References: List of WLAN channels, What’s the Difference Between 2.4 and 5 GHz Wi-Fi (and Which Should I Use)?, What is the difference between 2.4 GHz, 5 GHz, and 6 GHz wireless frequencies?

The header in the exhibit belongs to the User Datagram Protocol (UDP), which is a transport layer protocol that provides connectionless and unreliable data delivery. UDP header consists of four fields: Source Port, Destination Port, Length, and Checksum. The Source Port and Destination Port fields identify the endpoints of the communication, and are 16 bits each. The Length field specifies the total length of the UDP datagram, including the header and the data, and is also 16 bits. The Checksum field is used to verify the integrity of the UDP datagram, and is optional in IPv4 but mandatory in IPv6. The Checksum field is also 16 bits.

The other options are incorrect because:

B. Transmission Control Protocol (TCP) is another transport layer protocol that provides connection-oriented and reliable data delivery. TCP header has more fields than UDP header, such as Sequence Number, Acknowledgment Number, Window Size, etc. TCP header is at least 20 bytes long, while UDP header is only 8 bytes long.

C. 802.11 Wi-Fi is a set of standards for wireless local area networks (WLANs). 802.11 Wi-Fi header is different from UDP header, as it contains fields such as Frame Control, Duration, Address 1, Address 2, Address 3, etc. 802.11 Wi-Fi header is at least 24 bytes long, while UDP header is only 8 bytes long.

D. Ethernet Protocol is a data link layer protocol that defines the physical and logical characteristics of a wired network. Ethernet header is different from UDP header, as it contains fields such as Destination MAC Address, Source MAC Address, EtherType, etc. Ethernet header is 14 bytes long, while UDP header is 8 bytes long.

E. Internet Protocol (IP) is a network layer protocol that provides logical addressing and routing for data packets. IP header is different from UDP header, as it contains fields such as Version, Internet Header Length, Type of Service, Total Length, Identification, Flags, Fragment Offset, Time to Live, Protocol, Header Checksum, Source IP Address, Destination IP Address, etc. IP header is at least 20 bytes long, while UDP header is 8 bytes long. References:

• Aruba Certified Network Technician (ACNT) | HPE Aruba Networking
• User Datagram Protocol - Wikipedia
• Transmission Control Protocol - Wikipedia
• IEEE 802.11 - Wikipedia
• Ethernet frame - Wikipedia
• [IP header - Wikipedia]

 A switch is a device that operates at the data link layer (Layer 2) of the OSI model. It is responsible for forwarding frames based on the MAC addresses of the source and destination devices. A switch can also perform media access control, VLAN tagging, QoS, and other Layer 2 functions. A router, on the other hand, operates at the network layer (Layer 3) and routes packets based on their IP addresses. A transceiver is a device that converts electrical signals to optical signals and vice versa, and operates at the physical layer (Layer 1). A UTP cable is a type of twisted pair cable that is also used at the physical layer to transmit data. References: Data link layer - Wikipedia, Data Link Layer | Layer 2 | The OSI-Model, What is Layer 2? - Definition from Techopedia, An Overview of Layer 2 Ethernet – What is it and why does it matter?