Fire Protection Specialist CFPS Release Date

Computers and other information technology equipment are particularly susceptible to heat, steam, and combustion products, which can damage their sensitive components, cause data loss or corruption, and impair their functionality.Therefore, fire protection for IT equipment should consider the potential sources of heat, steam, and combustion products, such as electrical faults, flammable liquids, dust accumulation, water-based sprinklers, or smoke from adjacent areas, and implement appropriate measures to prevent, detect, and suppress fires, as well as to minimize the exposure of IT equipment to these hazards1234.References:Standard for the Fire Protection of Information Technology Equipment;Fire Protection of Computer Rooms—Legal Obligations and Best Practices - ISACA;Exploring Requirements for Information Technology Equipment;Demystifying IT room protection requirements - Consulting.

An as built plan review is a type of plan review that may provide information about a modification such as the removal of an abandoned underground flammable liquid tank. An as built plan review is conducted after the construction or alteration of a building orsystem is completed and before the final approval or acceptance by the AHJ. An as built plan review verifies that the building or system conforms to the approved plans and specifications and complies with the applicable codes and standards. An as built plan review may also identify any changes or deviations from the original plans that occurred during the construction or alteration process, such as the removal of an underground tank.References:

• NFPA 1: Fire Code, 2018 Edition, Section 1.12.8.1.11
• Fire Protection Handbook, 20th Edition, Volume 1, Chapter 5, Section 5.2.3.42

According to NFPA 230: Standard for the Fire Protection of Storage, 2015 Edition, building codes should limit the size of an unsprinklered facility used for the processing and storage of Municipal Solid Waste (MSW) built of type V construction to 7,500 ft2 (697 m2). This is based on the assumption that the MSW has a heat release rate of 18,000 Btu/ft2-min (200 kW/m2) and a fire growth rate of 0.046 min-1.Type V construction is defined as a type of construction in which the structural elements, exterior walls, and interior walls are of any materials permitted by the code123

References:

• NFPA 230: Standard for the Fire Protection of Storage
• 5 Types of Construction per the IBC | Building Code Trainer
• 2.4 MUNICIPAL SOLID WASTE LANDFILLS - U.S. Environmental Protection Agency

OSHA regulation 1910.110 addresses storage and handling of liquefied petroleum gas (LPG). This regulation covers the general requirements for the design, construction, installation, operation, inspection, and maintenance of LPG systems, including containers, piping, valves, fittings, regulators, burners, and appliances. The regulation also specifies the safety precautions and procedures for the prevention of fire and explosion hazards involving LPG. The regulation applies to all employers who store, handle, or use LPG in their workplaces.References:

• OSHA: 1910.110 - Storage and handling of liquefied petroleum gases1
• Nebula Safety: Storage & Handling of Liquefied Petroleum Gases (LPGs)2