Changed JN0-363 Exam Questions

The "ultimate-hop-popping" term refers to the action taken by the penultimate router in an LSP to remove the MPLS label before delivering the packet to the ultimate router,which is not desired here. Configuring the "explicit-null" statement causes the penultimate router to replace the top label with a label that has a value of 0, which instructs the ultimate router to perform a label lookup and preserve the label switching for the entire LSP.

References:

• Juniper Networks documentation on MPLS: MPLS Applications User Guide for Routing Devices

The root bridge in a spanning-tree network is the bridge with the smallest or the lowest bridge ID.

In the absence of a manually configured priority, the Spanning Tree Protocol (STP) elects the root bridge based on the lowest bridge ID, which is a combination of the priority and the MAC address. The device with the lowest MAC address will have the lowest bridge ID and thus be elected as the root bridge.

References

• Juniper Networks Technical Documentation on STP

In OSPF, a totally stubby area does not permit type 3 summary LSAs (inter-area routes) or type 5 external LSAs (routes from outside the OSPF domain) to be flooded into the area. The area border router (ABR) will only send a default route as a type 3 LSA into the totally stubby area.

References:

• Juniper Networks documentation on OSPF Areas: Understanding OSPF Areas

In MPLS (Multiprotocol Label Switching) networks, routers use label switching to forward packets. The first router at the edge of the MPLS network (R1) will perform a lookup in the mpls.0 table to determine the label to attach to the packet as it enters the MPLS network. This label informs the next routers in the MPLS network (like R2) on how to forward the packet. Internal MPLS routers, like R2, also perform lookups in their mpls.0 table to determine how to switch the packet toward its destination (label swapping). The inet.3 table is used for resolving next-hop information for labeled routes, but it's the mpls.0 table that is used for label switching decisions.

References:

• Juniper Networks documentation on MPLS: MPLS Applications User Guide for Routing Devices