4A0-C02 Exam Dumps : Nokia SRA Composite Exam

Queue 2 in "policer-output-queues," the default queue group used by policers on egress, because there are no queues in the "qg-10" queue-group template.

The local SAP's queue 1, because there is no queue in the "qg-10" queue-group template for EF traffic.

Queue 1 in the "qg-10" queue-group, because it exists by default and all traffic is mapped to it.

EF traffic is dropped because there are no queues in the "qg-10" queue-group template.

A Spanning Tree BPDU will be sent across the mesh flushing the FDB table in all devices participating in the VPLS instance.

Stale information will be used within the VPLS instance to forward traffic until the FDB ages out.

An LDP control message will be sent to all devices in the mesh participating in the VPLS instance. Only MAC addresses associated with the PE that the failure occurred on will be flushed.

An LDP control message will be sent to all devices in the mesh participating in the VPLS instance. The entire FDB in the VPLS instance will be flushed.

The first 3 bits of the DSCP value are copied directly into the EXP field on the first network egress.

The EXP bits are set on the first network egress, based on a combination of the SAP-ingress classification and the network policy applied.

The 3 priority bits are copied directly from the dot1p header into the EXP field of the first MPLS header.

The EXP bits are set based on a default map that translates DSCP codes into internal forwarding classes on SAP-ingress.