EMC D-PE-OE-23 Exam With Confidence Using Practice Dumps

To enable capturing the full POST (Power-On Self-Test) sequence using the iDRAC interface, follow these steps:

Step-by-Step Guide:

Log into the iDRAC Interface:

Access the iDRAC UI using the server’s IP address from a web browser.

Enter your credentials to log in.

Navigate to System BIOS Settings:

Go to the Configuration tab on the top menu.

Select BIOS Settings from the dropdown menu. This will take you to the settings where you can manage BIOS-related configurations.

Enable POST Sequence Logging:

In the BIOS Settings, look for an option related to POST Behavior or Boot Sequence Capture.

Enable Verbose Mode or Capture Full POST Sequence. This setting ensures that the entire POST process is logged in detail during the next boot attempt.

Alternatively, if there is a specific setting for Capture System Boot Logs, enable it to ensure detailed logging during POST.

Apply the Changes:

After enabling the POST capture option, click Apply or Save.

iDRAC may prompt for confirmation or inform you that changes will take effect upon the next reboot. Confirm any prompts as required.

Restart the Server (if necessary):

If the server is currently off, attempt to power it on. If it’s on, you may need to perform a Graceful Shutdown followed by a restart to initiate the POST sequence.

Review POST Logs After Reboot:

Once the server attempts to boot, return to the iDRAC Logs section to review the captured POST logs.

Go to Maintenance > System Event Log or Lifecycle Log to view the detailed logs from the POST sequence. This can help diagnose why the server is failing to boot.

By enabling this setting, you will capture detailed information during the POST process, which can then be reviewed to identify any hardware or configuration issues preventing the server from booting successfully.

Entering BIOS Progress Mode on a Non-Responsive Dell PowerEdge R660 During POST

Server Troubleshooting (32%)

Explain Configuration Validation, crash capture, and minimum to POST

Analyze the visual indicators on server components - system ID, PSU, and BLINK

Understanding the Scenario

Server Model: Dell PowerEdge R660

Issue: Not responding during POST (Power-On Self-Test)

Objective: Enter BIOS Progress Mode to troubleshoot the issue

What is BIOS Progress Mode?

BIOS Progress Mode is a diagnostic feature that allows the system to display detailed POST codes and progress indicators during the boot process. This can help administrators identify where the boot process is stalling.

How to Enter BIOS Progress Mode

Method: Press and hold the System ID button for more than five seconds during the boot process.

Effect:

Forces the server into BIOS Progress Mode.

Displays detailed POST information on the screen.

Helps in diagnosing issues that prevent the server from completing POST.

Explanation of Options

Option A: Press and hold the power button for 15 seconds.

Analysis:

Holding the power button for an extended period typically forces a hard shutdown or initiates a power reset.

Does not help in entering BIOS Progress Mode.

Conclusion: Incorrect.

Option B: Enter <F2> when the server tries to POST.

Analysis:

Pressing during POST is the standard method to enter the BIOS Setup Utility.

However, if the server is not responding during POST, this method may not be effective.

Does not specifically enable BIOS Progress Mode.

Conclusion: Less effective.

Option C: Press and hold the System ID button for more than five seconds.

Analysis:

Pressing and holding the System ID button for over five seconds triggers the server to enter BIOS Progress Mode.

This method is designed for situations where the server is unresponsive during POST.

Conclusion: Correct Answer.

Option D: Disconnect and reconnect the power cables for both PSUs.

Analysis:

Power cycling the server by disconnecting and reconnecting power may not resolve POST issues.

Does not enable BIOS Progress Mode.

Conclusion: Unlikely to help.

Dell Operate References

Server Troubleshooting (32%)

Explain Configuration Validation, crash capture, and minimum to POST:

Understanding how to enter BIOS Progress Mode is essential for diagnosing POST-related issues.

Analyze the visual indicators on server components - system ID, PSU, and BLINK:

System ID Button:

Located on the front panel of the server.

Serves multiple functions, including identifying the server in a rack and triggering diagnostic modes.

System Administration (18%)

Configure BIOS, Storage, virtual media, networking, user access, lockdown mode, and group management:

Familiarity with BIOS access methods and diagnostic tools is crucial for system administrators.

Conclusion

When a Dell PowerEdge R660 server is not responding during POST, pressing and holding the System ID button for more than five seconds will force the server into BIOS Progress Mode. This allows the administrator to see detailed POST codes and identify where the boot process is failing.

To configure an iDRAC shared management port with LOM2 and set up a failover network using LOM3 in the iDRAC interface, follow these steps:

Step-by-Step Guide:

Access iDRAC Network Settings:

In the iDRAC interface, navigate to the iDRAC Settings tab in the top menu bar.

Select Network from the dropdown options to access network configuration settings.

Configure the Shared Management Port:

In the Network settings, locate the section for Network Interface or LAN Interface Configuration.

Change the NIC Selection to Shared. This will enable the use of a LAN on Motherboard (LOM) port for iDRAC management.

Select LOM2 for the Shared Management Port:

Once you’ve selected Shared, additional options should appear for selecting the specific port.

Choose LOM2 as the Shared Management Port. This configures iDRAC to use LOM2 for its primary network connection.

Enable Failover and Select LOM3:

Look for the Failover settings within the same Network Interface configuration.

Enable Failover and select LOM3 as the failover network port. This configuration allows iDRAC to switch to LOM3 automatically if there is an issue with the connection on LOM2.

Save and Apply Settings:

Once you have configured the shared management port and failover settings, click Apply or Save to confirm the configuration.

The iDRAC interface may briefly refresh, and you should receive a confirmation that the settings have been applied successfully.

Verify Configuration:

After the settings are saved, you can verify that LOM2 is listed as the shared management port and that LOM3 is set as the failover port under Network settings.

By following these steps in the simulator, you should be able to configure iDRAC to use LOM2 for the shared management port and set up a failover network with LOM3. Make sure to save your changes to apply the configuration.