Free and Premium Supermicro SMI300XE Dumps Questions Answers

When handling theGPU tray, it should be placed ona flat, stable surfacetoprevent damage and ensure safety.

Option B (Correct):Aflat surfaceprovides stability and preventsaccidental damage or tipping.

Option A (Incorrect):Placing the trayon top of the chassiscan cause it tofall and sustain damage.

Option C (Incorrect):Thefloor is unsafedue tofoot traffic, riskingaccidental damage.

Option D (Incorrect):Acardboard box may not support the tray’s weight, making itunstable.

TheAGFHC tool requires a dual-CPU setupto function properly. IfCPU 2 is missing, the toolfails to operate correctly.

Option A (Incorrect):Thetool does not depend on DIMM configuration.

Option B (Incorrect):Missing GPUscan cause errors, butthe tool can still function.

Option C (Correct):AGFHC requires both CPUsto be installed.

Option D (Incorrect):PSU reseating isnot requiredfor AGFHC operation.

ForSupermicro MI300X GPU systems,removing the power supply unit (PSU) improperlycan lead to serious issues.

Why the red lock exists?

Thered locking mechanismensures that thePSU is properly securedin the system.

Before disengaging the PSU, thered lock must first be unlockedto avoid damage.

If you forcefully shift the release lever without unlocking the red lock:

B: The power supply unit will fail→ If the PSU is removed improperly, it can causeinternal damageto power connectors, resulting in PSUfailure or improper functioning.

C: You could permanently damage the lock on the power supply unit→ Thelocking mechanismis designed for smooth disengagement. Forcefully shifting the lever canbreak or warpthe lock, making itimpossible to secure the PSU back in place.

Incorrect Answers Explained:

A (All answers are correct)→ This is incorrect becausenot all answers are valid.

D (The PSU can no longer be secured into the tray)→ This happensonly if the lock is damaged, which is covered underoption C.

Supermicro’s official documentation clearly statesthatunlocking the red lock firstis a critical step before removing or replacing the PSU.

When removing theGPU tray, it is crucial tokeep it leveltoprevent damage to the chassis and cooling fans below.

Option A (Correct):If the tray tilts, it canhit the upper chassis or damage fans below.

Option B (Incorrect):There isno specific 16-degree angle requirement.

Option C (Incorrect):Work surface placement does not impact removal safety.

Option D (Incorrect):Thescrews must be removed first, but they do not affect the removal angle.

Whenremoving the GPU trayin anMI300X system, the following precautions must be taken:

Two people should remove the trayas itweighs over 70 pounds, making it unsafe for one person to handle.

Keeping the tray straightprevents it fromtilting, which candamage the chassis components.

Unnecessary movement can damage cooling fansdirectly beneath the GPU tray.

Since all the above precautions arecritical for safe removal, thecorrect answer is D (All of the above).

IfROCm commands fail to provide output, the primary issue is likelymissing or undetected GPUs. Thebest way to validate this is by checking the IPMI GUI and reviewing the GPU component sectionto ensure that all GPUs are present.

Option A (Correct):Missing GPUsare the most common causeof ROCm failures. The IPMI GUI provides visibility into which GPUs are detected.

Option B (Incorrect):CPU misalignment would causegeneral system failure, not ROCm-specific issues.

Option C (Incorrect):The GPU baseboard status can be checked in IPMI but isnot the primary causeof ROCm failures.

Option D (Incorrect):ROCm can function with multiple missing GPUs, butthe key issue is confirming GPU presence first.

Tosafely remove the GPU trayfrom theMI300X system,two peopleare required.

Option A (Incorrect):One personcannot safely removethe tray as it is too heavy (~70 lbs).

Option B (Incorrect):Six people are unnecessary for this task.

Option C (Correct):Two peoplearerecommended by Supermicroto ensure safe removal.

Option D (Incorrect):Ten people are excessive and impractical.

Thus,the correct answer is C (2 people).

When theGPU tray is pulled out partially, itlocks in placetoprevent accidental removal or dropping. To fully remove it,two people must press down on the lever on each sidebefore continuing.

Option A (Correct):Thetray locks automaticallyto ensure safe removal, and two people are needed to press the unlock levers.

Option B (Incorrect):Thetray does not vibrate or flash redwhen released.

Option C (Incorrect):Thetray does not contain liquid components.

Option D (Incorrect):Thetray does not generate excessive heat upon removal.

TheROCm command outputprovides essentialGPU performance metrics:

Option A (Correct):Energy CountertracksGPU power consumption.

Option B (Correct):Firmware DetailsprovideGPU firmware version.

Option C (Correct):Temperatureshowsreal-time thermal readings.

Option E (Correct):Power DrawgivesGPU power usage data.

Option D (Incorrect):vBiosis not a key ROCm statistic.

Option F (Incorrect):Socket Type is not includedin ROCm statistics.