Free and Premium SAP C_SACS_2321 Dumps Questions Answers

A component filter affects only itself, meaning that it applies a filter to the data displayed in a single widget, such as a chart or a table. A component filter does not affect the story, the version, or the model; these are different levels of filtering that can be applied to the data in a story. Verified References: [SAP Analytics Cloud - Filter Data in Stories]

When converting a story to Optimized Design Experience, you need to be aware that some elements that are available in the Classic Design Experience are not yet supported in the Optimized Design Experience. These elements include:

• Grid pages
• Linked analysis
• Geo maps
• Images
• Shapes
• Texts
• Buttons
• Input controls
• Value driver trees
• Explorer

If your story contains any of these elements, you will receive a warning message before converting the story, informing you that these elements will be permanently deleted from the story. You can choose to proceed with the conversion or cancel it. If you proceed, the unsupported elements will be removed from the story, and you will not be able to restore them1.

You can define a calculation for a table in three ways:

• Table: You can add a simple calculation by selecting two measures in a table, right-clicking, choosing Add calculation, and choosing the calculation you want. You can also add a repeating or single column or row to a table by right-clicking on a measure or dimension and choosing Add Calculation1.
• Calculation editor: You can open the calculation editor from the drop-down menu of Measures or Dimensions in the Designer Panel and create complex calculations for a chart or table. For each type of calculation, a new calculated member is created. You can also use dimension attributes as part of a calculation2.
• Story: You can create a calculated measure in the Builder pane of a story. When setting up your calculation, you apply the typical formula functions, conditions, and operators to the data contained in your model. Calculated measures allow you to perform mathematical and Boolean operations on your data1.

References:

1: Calculating Data in Stories - SAP Learning 2: SAP Analytics Cloud In-story Calculation Series – An Introduction

The valid targets for hyperlinks are external websites, SAP Analytics Cloud stories, and SAP Analytics Cloud story pages. External websites are web pages that are outside of SAP Analytics Cloud, such as SAP Analytics Cloud stories are presentation-style documents that use charts, visualizations, text, images, and pictograms to describe data. SAP Analytics Cloud story pages are individual pages within a story that contain one or more widgets. SAP BusinessObjects Web Intelligence documents and SAP Analysis for Microsoft Office workbooks are not valid targets for hyperlinks; they are different types of documents that are not supported by SAP Analytics Cloud. Verified References: [SAP Analytics Cloud - Hyperlinks]

The SAP Analytics Cloud mobile app allows users to view and interact with stories, collaborate with colleagues using comments and notifications, and share links to stories via email or other apps. Users cannot create stories, datasets, or models using the mobile app. Verified References: [SAP Analytics Cloud - Mobile App]

When you create a story using a file as the data source, you automatically create an embedded dataset. A dataset is a collection of data that is imported into SAP Analytics Cloud and can be used in a story. An embedded dataset is unique to that story and cannot be shared outside the story or refreshed. You can transform or wrangle the data in the dataset to meet your story needs in the Data Preparation area

The Optimized Design Experience is a new user interface for SAP Analytics Cloud that simplifies and enhances the story design process. The Optimized Design Experience introduces some new elements and tools, such as Data Analyzer, Point of Interest, Time Series chart, etc. However, it also removes some elements and tools that are available in the Classic Design Experience, such as Grid page, Explorer, Digital Boardroom, etc. Therefore, the correct answer is Grid page, as it is the element that is not available in the Optimized Design Experience. 

According to the SAP Help Portal1, stories can be viewed only in portrait mode for phones and landscape mode for tablets; the stories do not rotate their orientation. This is a unique quality of viewing stories on a mobile device, as opposed to viewing them on a computer browser, where the stories can be rotated and resized according to the screen dimensions. Therefore, it is important to design stories for mobile devices using the Responsive page and the Device Preview Bar in SAP Analytics Cloud Story Design.

Linked Analysis is a feature that allows you to link multiple widgets in a story based on the same model. You can use Linked Analysis to do the following:

• Filter data in multiple widgets by selecting a data point in one widget. For example, if you select Soft Drinks in a chart, all the other linked widgets will show data for Soft Drinks only.
• Drill down or up in multiple widgets by changing the level of detail in one widget. For example, if you drill down from Product Category to Product Name in a table, all the other linked widgets will show data for Product Name as well.
• Highlight data in multiple widgets by hovering over a data point in one widget. For example, if you hover over Germany in a geo map, all the other linked widgets will highlight the data for Germany.

To use Linked Analysis, you need to have the following:

• Multiple widgets based on the same model. You can link any type of widget, such as charts, tables, geo maps, etc., as long as they are based on the same model.
• A common dimension or measure between the widgets. You can link widgets based on any dimension or measure that they share in common.

You do not need to have the following for Linked Analysis:

• Multiple stories. You can use Linked Analysis within the same story. You cannot link widgets across different stories.
• Multiple data models. You can use Linked Analysis with one model only. You cannot link widgets based on different models.
• Multiple pages. You can use Linked Analysis within the same page. You cannot link widgets across different pages.

Therefore, the correct answer is Multiple widgets, as it is the necessary element for Linked Analysis. Verified References:

• : Link Widgets with Linked Analysis

This is one of the story guidelines recommended by SAP Analytics Cloud. According to the course material1, “When designing your stories, keep them as simple as possible. In general, it is easier for users to consume story content if it is present in smaller bits rather than have a few large stories with many pages to navigate.” The other options are not mentioned as guidelines in the course material.

1: Introducing SAP Analytics Cloud Story Design | SAP Training 2

A section is a way to group and organize widgets in a story based on a dimension. To create a section, you need to have the following:

• A dimension that you want to use as the basis for grouping the widgets. You can choose any dimension from any model in the story.
• One or more widgets that you want to display in each section. You can add any type of widget, such as charts, tables, geo maps, etc.

You can create sections in both the Classic Design Experience and the Optimized Design Experience, but the process is slightly different. Therefore, the correct answer is dimension and widget, as they are required to configure a section in a story

The correct answers are B. Public and D. Embedded. These are two of the dataset types that SAP Analytics Cloud supports, according to the SAP Help Portal1. A public dataset is a standalone dataset that is stored in SAP Analytics Cloud and can be found in a folder location on the Files page1. An embedded dataset is a dataset that is saved within a story and does not appear in the Files list1. You can convert an embedded dataset to a public one if you want others to be able to use it1.

The other options, A. Import and C. Live, are not dataset types, but data source types. You can import data from a file or other data source to create a dataset or a model2. You can also use live data from a source system to create a model, but not a dataset2.

1: About Datasets and Dataset Types | SAP Help Portal 3 2: Choose Between Datasets and Models | SAP Help Portal

When a model includes a prompt, the prompt is presented at runtime before data can be displayed in the story. The prompt allows users to select the values they want to filter the data by. The prompt is not related to the predefined widgets, the rendering of widgets, or the navigation to widgets. Verified References: [SAP Analytics Cloud - Prompting]

These are two of the options that you can use for data wrangling when you import a file for a story in SAP Analytics Cloud, according to the SAP Help Portal1. Data wrangling is the process of cleaning, structuring, and enriching raw data into a desired format for better decision making in less time2.

The custom expression editor is a tool that allows you to create or edit formulas and expressions for your data columns3. You can access the custom expression editor by clicking on the formula icon in the builder panel or by double-clicking on a column header in the data view3. The custom expression editor provides a list of functions and operators that you can use to manipulate your data, such as arithmetic, logical, string, date, and aggregation functions3. You can also use the custom expression editor to create calculated columns or measure-based dimensions from your existing columns3.

The transform bar is a tool that allows you to apply various transformations to your data columns, such as renaming, reordering, grouping, splitting, merging, or deleting columns4. You can access the transform bar by clicking on the transform icon in the builder panel or by right-clicking on a column header in the data view4. The transform bar provides a list of actions that you can use to modify your data structure, such as move left, move right, group by, split by delimiter, merge columns, or delete column4. You can also use the transform bar to change the data type or format of your columns, such as text, number, date, currency, or percentage4.

The story option that can help you create a story as a launchpad to other stories is hyperlink. A hyperlink is a link that allows users to navigate from one location to another by clicking on it. You can use hyperlinks to link widgets, text, or images in a story to other stories in SAP Analytics Cloud, creating a launchpad effect. Input control, linked analysis, and RSS feed are not story options that can help you create a story as a launchpad to other stories; they are options that can help you filter data, link widgets, or display news feeds in a story. Verified References: [SAP Analytics Cloud - Hyperlinks]

To apply the formatting of the year 2024 to the years 2025 and 2026, you need to use the level option Self and Descendants in the styling rules. This option applies the formatting to the selected member and all its lower-level members in the hierarchy1. In this case, the selected member is the year 2024, and its lower-level members are the months, quarters, and half years that belong to 2024. The formatting will also be applied to the years 2025 and 2026, and their lower-level members, because they are at the same level as 2024 in the hierarchy.

The other level options are:

• Self: This option applies the formatting only to the selected member, not to any other members in the hierarchy1. In this case, the selected member is the year 2024, and the formatting will not be applied to any other years or lower-level members.
• Self and Siblings: This option applies the formatting to the selected member and all its siblings, which are members at the same level in the hierarchy1. In this case, the selected member is the year 2024, and its siblings are the years 2025 and 2026. The formatting will be applied to these three years, but not to their lower-level members.
• Self and Children: This option applies the formatting to the selected member and its immediate children, which are members one level below in the hierarchy1. In this case, the selected member is the year 2024, and its immediate children arethe quarters and half years that belong to 2024. The formatting will be applied to these members, but not to any other years or months.

• Points of Interest Layer - Sets of geographical data that can be added to a geo map and analyzed with reference to business data from a model. For example, you can add points of interest layer that shows the locations of your customers or stores on a geo map.
• Choropleth/Drill Layer - Applies blocks of shading to different geographical locations based on the value of the selected measure. For example, you can add choropleth/drill layer that shows the sales revenue by country or region on a geo map.
• Feature Layer - Uses external data from valid service URLs. This data is layered on top of your existing geo map to provide additional context. For example, you can add feature layer that shows the traffic conditions or weather information on a geo map.
• Flow Layer - Shows the connection between two locations based on the value of the selected measure. For example, you can add flow layer that shows the trade volume or migration patterns between countries or regions on a geo map.
• Heat Map Layer - Uses color to visualize the data density of the selected measure. For example, you can add heat map layer that shows the population density or crime rate by area on a geo map. Verified References: [SAP Analytics Cloud - Geo Maps]

You can add a section to a canvas page in a story. A section is a container that holds one or more widgets and can be used to group related content or apply filters. A digital boardroom, a table, and a chart are not valid targets for adding a section; they are either different types of presentations or widgets that can be added to a section. Verified References: [SAP Analytics Cloud - Sections]