Pass H12-322 Exam Guide

The site should be directly visible between the coverage areas. It is recommended that there should be no obstacles to block.

To ensure signal transmission, the site installation height is as high as possible

Avoid interference from strong electric and other signals near the site

Reliable power is required near the site

Overlay wireless network construction scenario based on existing cable bearer network

Unified construction and unified transformation of wired and wireless networks

Unified management of wired and wireless users

Scenes for independent management of wired and wireless services

Pad survey tool can generate network gauge report, AP list, bill of materials

Pad survey tool export project is to re-import the post-construction project into the planning tool for further planning, and then import it into the WLAN.

Tester 2.0 tool compared to actual collected data

Wi-Fi interference source location and power test functions are available for both the WLAN Planner tool and the Pad tool.

For a building, using the Pad survey tool for the obstacle attenuation test, the surveyor is required to test each obstacle.

Azimuth specifies the coverage direction of the antenna

Azimuth can be understood as the angle that the plane in the north direction rotates clockwise to coincide with the plane of the antenna.

Downtilt angle affects the coverage of the antenna in the vertical direction

The downtilt angle is the angle between the antenna and the vertical plane