Legit ECP-206 Exam Download

For IP destinations not found in the IS-IS Level 1 database, the Level 1 router must forward packets to the nearest Level 1-Level 2 router with the attach bit set. The attach bit is a flag in the IS-IS Level 1 LSP that indicates that the router is also a Level 2 router and can reach destinations outside the Level 1 area. The Level 1 router will install a default route pointing to the nearest Level 1-Level 2 router with the attach bit set. This way, the Level 1 router can forward packets to other areas without having to maintain a full Level 2 database. References: Ericsson IP Networking - Routing Protocols, Configure Attach Bit Set - Cisco

There are 8 different priorities available to use in a VLAN header. A VLAN header is a 4-byte field that is inserted into an Ethernet frame to indicate the VLAN membership and priority of the frame. The VLAN header consists of two subfields: the tag protocol identifier (TPID) and the tag control information (TCI). The TCI subfield contains three subfields: the priority code point (PCP), the drop eligible indicator (DEI), and the VLAN identifier (VID). The PCP subfield is a 3-bit field that specifies the priority level of the frame, ranging from 0 (lowest) to 7 (highest). The PCP values can be used to implement quality of service (QoS) mechanisms on bridges and switches12.

References: HTML rt Tag - W3Schools, VLAN 0 Priority Tagging Support - Cisco

Two protocols that apply to both IPv4 and IPv6 are:

• SNMP: This stands for Simple Network Management Protocol, which is a protocol that allows network administrators to monitor and manage network devices such as routers, switches, servers, printers, etc. SNMP uses a client-server model, where an SNMP manager (client) can query or configure an SNMP agent (server) on a network device using SNMP messages. SNMP can operate over both IPv4 and IPv6 networks56.
• DNS: This stands for Domain Name System, which is a protocol that translates human-readable domain names (such as www.example.com) into numerical IPaddresses (such as 192.0.2.1 or 2001:db8::1) that identify network devices. DNS uses a hierarchical distributed database of name servers that store and resolve domain names and IP addresses. DNS can support both IPv4 and IPv6 addresses78.

References: Simple Network Management Protocol - Wikipedia, SNMP over IPv6 - Cisco, Domain Name System - Wikipedia, DNS for IPv6 - Cisco

The device that will fragment IPv6 packets is the source host. Fragmentation is a process of dividing a large packet into smaller pieces that can fit the maximum transmission unit (MTU) of the network link. In IPv4, fragmentation can be performed by either the source host or any intermediate router along the path. However, in IPv6, fragmentation is only allowed at the source host, and routers are not allowed to fragment packets. This reduces the processing overhead and complexity at routers and avoids potential fragmentation attacks. If a router receives an IPv6 packet that is too large for the next-hop link, it will drop the packet and send an ICMPv6 Packet Too Big message back to the source host56.

References: IPv6 address - Wikipedia, IPv6 Fragmentation - Cisco