Download Full Version 1z0-106 Oracle Exam

Explanation of Answer A:When thechrootcommand is executed with/jail, the environment is changed to use/jailas its new root directory. Inside this environment, only the directories and files copied into/jailare accessible. Since/jaildoes not contain a/rootdirectory, the commandcd(which defaults to changing to the user's home directory) will fail, displayingNo such file or directory. Thepwdcommand shows the root of the chroot environment (/), andlsdisplays the contents of/jail, which includesbinandlib64.

Option A (Correct):The rule is applied to both IPv4 and IPv6 packets. Theinettable is used for filtering both IPv4 and IPv6 traffic, and since the rule is added to theinettable, it affects both IP versions.

Option E (Correct):The rule drops TCP packets inbound on port 80. The rule specifies theinputchain in thefiltertable, and it drops (drop) all TCP traffic (tcp) destined for port 80 (dport 80), which means any incoming TCP traffic on port 80 will be dropped.

Option B (Incorrect):The command does not automatically update the configuration on disk; the rule is applied immediately in memory but does not persist across reboots unless explicitly saved.

Option C (Incorrect):The rule specifies TCP packets only, not all traffic. Therefore, it does not drop traffic for protocols other than TCP.

Option D (Incorrect):Although this statement is correct, it is less specific than Option A, which is more accurate because it mentions both IP versions.

Option F (Incorrect):The rule applies to inbound traffic, not outbound, so it does not drop outbound traffic.

Oracle Linux Reference:Refer to:

Oracle® Linux 8: Managing Firewall Rules with nftables

Option B: journalctl -p err shows only error log level.

Explanation:

The -p or --priority option in journalctl filters messages by their priority level.

When specifying asingle priority level, journalctl shows messagesonlyat that level.

The priority levels, as per syslog standards, are:

0: emerg

1: alert

2: crit

3: err

4: warning

5: notice

6: info

7: debug

Therefore, journalctl -p err displays messages with priorityerr (3)only.

Oracle Linux Reference:

Oracle® Linux 8: Managing Log Files- Section onFiltering Output withjournalctl:

"Use the -p option to display messages from the journal that have a specific priority level."

Example:

# journalctl -p err

Option D: journalctl -k shows kernel logs since the last boot.

Explanation:

The -k or --dmesg option filters messages from the kernel, equivalent to the output of the dmesg command.

This option implies -b, which limits the output to messages from the current boot.

Therefore, journalctl -k displays kernel messages since the last boot.

Oracle Linux Reference:

Oracle® Linux 8: Managing Log Files- Section onViewing Kernel Messages:

"Use the journalctl -k command to display kernel messages since the last system boot."

Example:

# journalctl -k

Option E: journalctl -p 6 shows all info log level messages and above.

Explanation:

When specifying a single numeric priority, journalctl displays messages withthat priority level and higher priority levels(i.e., lower severity).

Priority levels are ordered from 0 (highest severity) to 7 (lowest severity).

Therefore, journalctl -p 6 shows messages with priorities:

0 (emerg)

1 (alert)

2 (crit)

3 (err)

4 (warning)

5 (notice)

6 (info)

This includesinfo level messages (6)and all higher priority messages.

Oracle Linux Reference:

Oracle® Linux 8: Managing Log Files- Section onFiltering Output with journalctl:

"When you specify a single priority level, journalctl shows messages at that level and higher severity."

Example:

# journalctl -p 6

Why Other Options Are Not Correct:

Option A:journalctl -bl -p err fails if journal persistence is not configured.

Explanation:

The -b option displays messages from the current boot. This works even if journal persistence isnotconfigured because the logs from the current boot are stored in volatile memory (/run/log/journal).

Therefore, the command doesnot failif journal persistence is not configured.

Oracle Linux Reference:

Oracle® Linux 8: Managing Log Files- Section onJournal Volatility:

"By default, the journal stores logs in volatile memory and does not persist logs across reboots unless persistent storage is configured."

Option C:journalctl -p notice..warning shows all messages from notice to warning log level since the last boot.

Explanation:

The -p option allows specifying arangeof priorities. However, the correct order for the range should be from thehigher priority (lower number)to thelower priority (higher number).

Also, the priorities should be specified in the correct sequence, and ranges are inclusive.

Moreover, journalctl by default shows messages from all boots unless limited by the -b option.

Therefore, without -b, it does not limit messages to "since the last boot," making the statement incorrect.

Correct Command:

To display messages fromwarning (4)tonotice (5), the command should be:

# journalctl -p warning..notice -b

But even then, the priorities need to be specified correctly, and the command in Option C is incorrect.

Conclusion:

OptionsB,D, andEare correct because they accurately describe the behavior of the journalctl command in filtering and displaying log messages based on priority levels and sources.

Option C (Correct):If a device named/dev/hdbwith theide-diskdriver is discovered, a symbolic link/dev/sparediskwill be created, pointing to/dev/hdb.

Option D (Correct):TheKERNEL=="hdb"match specifies that the device will have the kernel device name/dev/hdb.

Option A (Incorrect):This is incorrect because existing symbolic links are not overwritten unless explicitly defined.

Option B (Incorrect):The device itself is not renamed to/dev/sparedisk; rather, a symbolic link is created.

Option E (Incorrect):The rule specifically requires bothKERNEL=="hdb"andDRIVER=="ide-disk"to match; it is not an either/or condition.