Complete H12-811_V1.0 Huawei Materials

Detailed Explanation:Static routing does not automatically recover from link failures; manual reconfiguration is required if a static route path becomes invalid. Dynamic routing protocols, on the other hand, adapt automatically to network changes, adjusting routes as needed. (Reference: HCIA-Datacom Training Material, Static vs. Dynamic Routing)

Detailed Explanation:An MPLS (Multiprotocol Label Switching) header includes the following fields:

Label: Identifies the MPLS path.

TTL (Time to Live): Limits the lifetime of the MPLS packet.

EXP (Experimental): Used for QoS marking. The Tos (Type of Service) field is part of the IP header, not MPLS.

(Reference: HCIA-Datacom Training Material, MPLS Header Fields)

In one-arm routing (or router-on-a-stick) mode, a single physical link (with sub-interfaces) can carry traffic between multiple VLANs, reducing the number of physical links required. This approach minimizes cabling and port usage while still enabling inter-VLAN communication. However, it does not inherently reduce IP address usage, routing table entries, or the number of devices required​.

Restoring factory defaults on an AR2200 router requires both clearing the current configuration and resetting saved configurations. These steps ensure that any custom settings are removed, reverting the router to its original state. Simply restarting or specifying a startup file without clearing configurations would not remove custom settings​.