Changed Hybrid-Cloud-Observability-Network-Monitoring Exam Questions

Comprehensive and Detailed Explanation From Exact Extract:

When the SNMP community string is changed on a device, SolarWinds recommends:

Edit the node properties and save the changes.

Update the community string in node properties to match the new value on the device.

"To restore polling, edit the node in SolarWinds, update the SNMP community string in the properties, and save the changes. This ensures that SolarWinds can authenticate and resume polling. Deleting and re-adding the node is not necessary, nor is restarting the SNMP service on the device in most cases."

The best practices for creating a Universal Device Poller (UDP) in SolarWinds are:

Consult vendor documentation for OID: Always check the device/vendor documentation for the correct OID to monitor the desired metric.

Perform SNMPwalk to determine if OID exists: Use SNMPwalk to verify the OID’s existence and see if it is supported and returns the correct values from the device.

Calling SolarWinds support is not a standard step for obtaining OIDs, and WBemtest is a Windows tool for WMI, not SNMP/OID polling.

Exact Extract from Official Guide:

“Consult device vendor documentation for correct OIDs and perform SNMPwalk to ensure the OID exists and is supported by the device before creating a UDP.”

— (Network Performance Monitor Administrator Guide, “Best Practices for Universal Device Pollers” section)

Comprehensive and Detailed Explanation From Exact Extract:

NetFlow is the Cisco IOS feature designed for monitoring and analyzing network traffic to pinpoint specific applications or endpoints consuming bandwidth or causing network slowness. It captures detailed flow information, including source/destination, ports, and protocols.

Ping the device from the polling engine: Verifies network connectivity and correct polling engine assignment.

Verify hardware health sensors: Ensures the platform is receiving valid sensor data; missing data may indicate sensor or device communication issues.

Adding a remote site node and waiting are not direct troubleshooting steps for missing data on a node that is already “up.”

Exact Extract from Official Guide:

“If a node is up but data is missing, check network connectivity from the polling engine using ping or SNMP walk tools, and verify that hardware health sensors are reporting valid data.”

— (Network Performance Monitor Administrator Guide, “Troubleshooting Nodes and Data Collection” section)