71301X Exam Results

In the Avaya Session Border Controller for Enterprise (ASBCE), the state of a Network Interface, after the deployment, is Disabled. A Network Interface is a logical interface that represents a physical port on the ASBCE server. A Network Interface can be configured with an IP address, subnet mask, gateway, and VLAN ID. After the deployment of the ASBCE server, the Network Interfaces are in a Disabled state by default. To enable a Network Interface, you need to use the ASBCE web interface or CLI and configure the interface parameters. You also need to assign the interface to a Zone, which is a logical grouping of interfaces that defines the security and routing policies for the ASBCE server

Before you can begin configuring SIP Trunking, the status that all the Avaya Session Border Controller for Enterprise (ASBCE) components / devices should show on the Device Management screen is Ready. The Device Management screen is a web interface that allows you to view and manage the ASBCE components / devices, such as EMS (Element Management System), SBC (Session Border Controller), or HCA (High Capacity Appliance). The Device Management screen displays information such as device name, management IP, version, status, reboot, and shutdown for each component / device. The status indicates the operational state of the component / device, which can be one of these values: Provisioned, Commissioned, Registered, or Ready. The Ready status means that the component / device is fully operational and ready to handle traffic. Therefore, before configuring SIP Trunking, you should make sure that all the ASBCE components / devices have a Ready status on the Device Management screen.

After installing a new Avaya Session Border Controller for Enterprise (ASBC6) component / device using the EMS GUI, you click on the Install link on the EMS Device Management page. After briefly displaying the Provisioned status, the final status that the ASBCE component / device should display is Running. The EMS Device Management page is a web interface that allows you to view and manage the ASBCE components / devices, such as EMS (Element Management System), SBC (Session Border Controller), or HCA (High Capacity Appliance). The EMS Device Management page displays information such as device name, management IP, version, status, reboot, and shutdown for each component / device. The status indicates the operational state of the component / device, which can be one of these values: Provisioned, Commissioned, Registered, or Running. The Running status means that the component / device is fully operational and ready to handle traffic. Therefore, after installing a new ASBCE component / device using the EMS GUI, you should wait until it displays a Running status on the EMS Device Management page.

Avaya Aura® Presence Services uses different ports for different purposes. Port 5222 is used by endpoints like Avaya one-X® Communicators, Avaya Equinox®, or Avaya IX™ Workplace to establish client-to-server XMPP connections with the Presence Services snap-in on the Avaya Breeze® server. Port 5269 is used for server-to-server XMPP connections with the third-party XMPP servers, such as Google Talk or Jabber. These ports enable the presence and instant messaging features for the users34