New Year Special 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: save70

Free and Premium HP HPE6-A69 Dumps Questions Answers

Page: 1 / 2
Total 60 questions

Aruba Certified Switching Expert Written Exam Questions and Answers

Question 1

Which MAC address is valid for use as a VSX System-MAC address?

Options:

A.

AB:00:04:00:FF:00

B.

0A:00:00.00.00

C.

FF:00:00:00:00:00

D.

01:00:5E40:10.01

Buy Now
Question 2

Refer to the exhibit.

Criteria

1. All outbound traffic to AS 64516 prefers Edge-2 to AS 64516

2. All other outbound traffic prefers Edge-1 to AS 64513

Given the customer connectivity depicted in the diagram which single change can be performed on Edge-2 to ensure the criteria are met?

Options:

A.

Configure Edge-2 to set ebgp-multihop 3 for the neighbor for AS 64516.

B.

Configure Edge-2 with a route-map to 'set as-path prepend"' to apply 64516 two times to the neighbor for AS 64516.

C.

Configure Edge-2 to set the local preference for specific routes originating from AS 64516 to 200 and all other routes from AS 64516 to 50

D.

Configure Edge-2 to set the weight on specific routes specific to AS 64516 to 1.

Question 3

You have designed a new wired solution for a customer that uses gateways and Dynamic Segmentation Which statements about User-Based Tunneling are true? (Select two)

Options:

A.

In U8T, the switch performs user authentication.

B.

in UBT, the Aruba Gateway performs user authentication

C.

UBT is supported only with Aruba Gateway standalone

D.

in UBT, the switch sends user role Information to Aruba Gateway

E.

In UBT, the Aruba Gateway assigns the Primary user role

Question 4

The customer has a requirement for creating security filtering for IPv4 and IPv6 traffic passing through an ArubaOS-CX 6400 switch. Which statement Is true about access-list on the selected switch model?

Options:

A.

IPv4 and IPv6 entries can be used in one ACL with separate rules

B.

Separate IPv4 and IPv6 ACLs need to be created for inbound and outbound traffic

C.

Only one inbound or outbound ACL can be bound to an interface.

D.

Routed interfaces can have only inbound ACLs

Question 5

A network administrator has deployed the following (partial) configuration:

What is the effect of this policy?

Options:

A.

Only subnet 10.254.254.0/24 is allowed to communicate with ip-addresses configured on VRF mgmt

B.

COPP traffic is restricted to subnet 10.254.254 0/24

C.

Only ssh traffic to ip-address in VRF mgmt is restricted to 10 254 254 0/24 network

D.

Only subnet 10.254 2540/24 is allowed to communicate with CoPP-addresses configured on VRF mgmt

Question 6

The example ACL is used with Aruba CX 6400 switches to permit traffic to web servers configured on interface 1/1/1 inbound with IP 10.254.4.1/24.

How does this ACL affect the HTTPS traffic to destination 10.254.4.7 from a client 10.253.1.5 via interface 1/1/2 with IP 10 254.3.1/24?

Options:

A.

The ACL would be valid only if bound to 1/1/2 outbound.

B.

The implicit rule allows the traffic

C.

The implicit rules deny the traffic.

D.

The traffic is allowed when ACL is Pound to inbound traffic.

Question 7

You have removed a member out of the ArubaOS-CX 6300 VSF configuration. The login to the removed member falls. What is true about switch login recovery?

Options:

A.

The task requires physical access to the switch

B.

The zeroize task executes the zeroize.txt from the root of the CF card on the switch

C.

The zeroize task will remove all user passwords: the configuration remains on the switch

D.

The task can be executed remotely

Question 8

A customer with an ArubaOS-CX 6300M switch is having a performance issue on the network and has received complaints about users experiencing intermittent connectivity. After performing troubleshooting it is determined that many of the local websites on the LAN that users are unable to reach are resolved to an invalid MAC address.

What are the minimum steps that should be performed to mitigate this condition? (Select two)

Options:

A.

Implement arp ACLs to define trusted MAC address to IP bindings

B.

Enable 'arp inspection' on the end-user physical ports

C.

Enable 'arp inspections on the end-user VLAN.

D.

Implement dhcpv4-snooping

E.

Enable 'arp inspection untrusted on the end-user physical pons

Question 9

A customer would like to utilize some ArubaOS-CX 6300F switches to perform OSPF routing.

With the ports set up as routed ports, and default parameters for OSPF, which action is the simplest way to allow the fastest communication…

Options:

A.

Utilize Equal-cost multi-path routing to aggregate more bandwidth on the WAN.

B.

Set the OSPF cost parameters on every interface on every switch according to the Bandwidth or each link

C.

No action is required

D.

Set the OSPF reference bandwidth to 10 or higher

Page: 1 / 2
Total 60 questions