Hitachi HQT-4420 Exam With Confidence Using Practice Dumps

When performing an online upgrade of an HCP G10 and the upgrade fails, theArc-deploy logsare the relevant logs available to assist with troubleshooting. These logs contain detailed information about the deployment and upgrade processes, including errors or issues encountered during the upgrade. Accessing these logs allows administrators to diagnose the failure and take corrective actions.

Hitachi Vantara Content Platform Installation References:

The Arc-deploy logs are essential for understanding the sequence of events and identifying the exact step or component that caused the failure during an online upgrade of the HCP G10.

When replacing an entire HCP G10 node, it is necessary to check the BIOS configuration. This ensures that the new hardware is correctly configured according to the required specifications for the HCP system. The BIOS settings need to be consistent with the rest of the cluster nodes to ensure proper functionality, performance optimization, and hardware compatibility. This check might include verifying boot order, enabling virtualization, setting appropriate hardware clock configurations, and other critical settings outlined in the "Hitachi Vantara HCP G10 Installation and Configuration Guide."QUESTION NO: 4

You are installing a HCP G10 with attached storage. The system will be networked using four 10 GbE SFP+ interfaces.

How many PCIe cards are installed in each HCP G10 node?

A. 1

B. 2

C. 3

D. 4

Answer:B

Each HCP G10 node with attached storage and networked using four 10 GbE SFP+ interfaces requires two PCIe cards. Typically, one PCIe card is allocated for network connectivity, while the other is used for storage connectivity. The cards need to support the necessary number of network interfaces and any additional connections required for attached storage. The specific configuration depends on the HCP model, but generally, two PCIe cards are sufficient to handle both networking and storage interfaces as described in the "HCP G10 Hardware Installation Guide."

For the HCP G10 SSD option:

Two SSD disks are installed at the rear of the server (A):This is correct. The SSDs in the HCP G10 server are typically installed at the rear of the server to provide fast access to critical system data, such as metadata and indexes.

Software RAID1 is used to mirror the disks (C):This statement is also correct. Software RAID1 provides mirroring of the SSD disks, ensuring redundancy and data protection in case of a disk failure. RAID1 is chosen for its simplicity and reliability in providing redundancy without requiring additional hardware. Details can be found in the "HCP G10 Hardware Configuration and Maintenance Guide."