What is the default TCP/IP port used by EMC NetWorker Management Console database process?
Which policy in EMC NetWorker determines the length of time that records are retained within the Client File Index (CFI)?
A Dell EMC NetWorker administrator always wants to perform a backup of the cluster virtual client data to its local storage node device. How can this be achieved?
Which EMC NetWorker command is replaced when using an EMC NetWorker module?
What is the correct sequence of steps to configure Dell EMC NetWorker as a cluster-aware application for Linux clients?
An EMC NetWorker backup client contains 650 GB of data in 750,000 files and is presently being backed up by an EMC NetWorker server-to-storage node with six tape drives connected via Fibre Channel. Analysis has determined that the storage node and SAN connections to the tape drive are not impacting performance. What is the recommended method for backing up this client?
An EMC NetWorker administrator has two Microsoft Exchange servers and one Microsoft SharePoint distributed farm that reside on an EMC CLARiiON disk array.
The backup administrator has the following two recovery requirements:
(1) The ability to recover both Exchange and SharePoint data by leveraging Microsoft VSS framework.
(2) The ability to roll back an entire volume to a previous point-in-time.
What is a recommended recovery solution?
What is the selection hierarchy used in determining to which EMC NetWorker pool data is sent?
When backing up a Lotus Domino database with EMC NetWorker Module for Databases and Applications, how is the Lotus Domino backup level determined?
What is the first step in the process for information protection using snapshots?
A site is using EMC NetWorker with EMC NetWorker Module for Databases and Applications for backups. The administrator wants to eliminate redundant backup data to significantly reduce backup storage requirements. Which component would you recommend adding to the backup environment?
A Dell EMC NetWorker backup administrator wants to run a clone after backing up their Microsoft Windows clients. Which configuration will combine the backup and clone?
A Dell EMC NetWorker backup administrator is configuring backups for a Microsoft Windows client with several large save sets. The administrator is considering using the parallel save streams feature.
What is a characteristic of the parallel save streams feature?
Which backup device type(s) is supported for NMM Exchange backups?
An administrator needs to use a Data Domain with DDBoost Option in an EMC Networker environment.
Which license(s) must be added on the EMC NetWorker Server?
What is the default port number for the Dell EMC NetWorker server to authenticate the NMC server host?
What is a recommendation to make more space available when the file system containing an AFTD becomes full?
What is an EMC NetWorker consolidated backup?
An EMC NetWorker administrator notices that clients are being backed up one at a time, even though they are scheduled to start simultaneously.
What may be a cause of this?
If a Level 5 backup is performed for an EMC NetWorker client, at what level is its Client File Index backed up?
What is one of the features available with VADP (vStorage APIs for Data Protection) in EMC NetWorker?
Which Dell EMC NetWorker daemon manages device operations on a storage node on behalf of the nsrd process?
Which directory holds the tracking information for each file backed up by the client "tuba" on EMC NetWorker server "soprano"?
What command option can be used to test connectivity and simulate the backup on an EMC NetWorker client without backing up the data?
What is a characteristic of EMC NetWorker's Open Tape Format (OTF)?
CL-1 is a client in an EMC NetWorker environment. The NetWorker server, NS-1, manages the environment and storage node SN-1A controls the data flow. You noticed that there are no entries in the /nsr/res/servers file on CL-1.
Which system is allowed to back up data from Client CL-1?
Click the Calculator icon in the upper left-hand corner.
In an EMC NetWorker environment, the customer is backing up 500 GB per day. The 500 GB is comprised of 35,000 very large files. According to EMC best practices, approximately how large will the Client File Index (CFI) be?
In EMC NetWorker what will automatically mount and label a scratch volume when needed?
Refer to the exhibit.
An EMC NetWorker customer has two data zones, A and B, with autochanger AC1 and AC2, respectively, with four drives each. AC1 is configured as a dedicated autochanger and AC2 is configured as a shared autochanger. Two drives of AC2 are statically assigned. How many drives of AC2 can be shared in Zone A?
Which EMC NetWorker command can be used to determine the number of records in the Client File Index for each client?
What needs to be configured to prevent possible name spoofing in an EMC NetWorker environment?
An EMC NetWorker administrator configures an advanced file type device, setting the device target sessions to two, and max sessions to four. How is data written to the advanced file type device?
Which directory holds the tracking information of each file backed up by the client "tuba" on EMC NetWorker server "soprano"?
In an EMC NetWorker environment, Auto Media Management is currently enabled on the autochanger. The customer requires unlabeled volumes in the autochanger to be used before recyclable volumes are reused.
In addition, the unlabeled volumes need to be automatically labeled before they are used. How can this be achieved?
A customer’s EMC NetWorker environment has a Solaris client that had been backing up without failing for several weeks. The client has the following local mount points:
And two nfs mount points:
The save set was identified as "ALL" in the client resource. The client had crashed and was successfully rebooted the previous day. The first request for a restore for this client was submitted for the last night's backup of /mars/data1/Monthly.doc and /jupiter/data1/Weekly.xls. The jupiter restore is successful but the mars data is not found and fails to be restored.
What is the most likely cause of this restore failure?
Which EMC NetWorker process coordinates all scheduled backups?
A user on the EMC NetWorker client wants to initiate a backup of selected files. At a minimum, which components must be configured before the backup can succeed?
Your Windows environment consists of several EMC NetWorker servers on the same subnet that are responsible for backing up only specific clients for security reasons. You need to change one backup client’s “parent” NetWorker server from NWServer-A to NWServer-B.
Which file do you need to change in order to ensure only NWServer-B can back up this client?
On a given EMC NetWorker host, what does the servers file define?
A backup administrator wants to exclude all user temp directories during backups. How can this be implemented using EMC NetWorker?
Refer to the exhibit.
In an EMC NetWorker environment, the storage node sn1 is down for maintenance. According to the client properties, what happens when the backup of the client starts?
You are installing a new EMC NetWorker server and would like alerts to be sent automatically to EMC Support. What additional component needs to be included as part of this installation?
You have a requirement to set up a NAS appliance into the EMC NetWorker environment. You have the remote username and passwords as well as the Fully Qualified Name (FQN) for the device and you wish to ensure that the NetWorker server can see the NDMP devices before the setup. Which command should be used to do this?
Client A performs backups to Storage Node S where the backup operations are managed by EMC NetWorker Server N. NetWorker Management Console is running on Server Y. Client A's configuration information was lost.
To which component must the client configuration data be restored?
What describes the use of Tape Stacking with the embedded storage node on an EMC Disk Library (EDL)?
What is the primary function of the EMC NetWorker job daemon?
Which EMC NetWorker process reads and manages the port range information?
Refer to the exhibit.
To which EMC NetWorker pool is the client save set backed up?
Copyright © 2021-2025 CertsTopics. All Rights Reserved
