A customer needs to improve throughput performance of iSCSI traffic on their Layer 2 switch. Which feature should the customer implement at the switch level?
You plan to install an HPE ProLiant DL360 Gen10 in an environment with an ambient temperature of 45 °C (113 °F).
Which additional option is required?
You are designing a solution to run a Citrix XenDesktop workload.
Which HPE planning and designing resource contains a detailed example of this type of solution, including a list of all the hardware and software components?
Which HPE tool can you use to ensure a consistent level of firmware exists across all BladeSystem interconnects and servers in an environment?
A customer wants to decrease problem resolution time on their HPE infrastructure.
Why would this customer benefit from Insight Remote Support?
A customer needs a storage solution to host a new virtualization platform that will host a database application. The customer is considering an HPE Nimble array.
What features would lead you to propose an HPE Nimble array over an HPE 3PAR array? (Select two.)
A customer needs a storage to run a database in an environment with many virtual machines. You have recommended a HPE MSA 2042 solution, but the customer has reservations about whether the MSA 2042 can deliver the required performance.
Which feature of MSA 2042 will help to improve iOP performance?
A customer has implemented an HPE ProLiant server with internal storage and needs to monitor the array health status.
Which management application can the customer use to discover errors quickly and minimize the possible downtime?
A customer needs to implement VMware across a few racks of servers. They anticipate a large amount of VM creation and retirement.
What are key technologies in a Top of Rack (ToR) switch that support this environment? (Choose three.)
You are upgrading firmware on two SN6000 switches in a fabric with a CLI connection. You did not wait for the upgrade to be activated on the first switch before beginning to install the firmware on the second switch.
What must you do to install the firmware on the second switch?
A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.
You are troubleshooting a POST error on a HPE ProLiant rack-mount server. HPE support has directed you to test a minimum hardware configuration.
Which components should you remove? (Choose two.)
You are designing a network for a customer that needs a centrally-managed solution for their physical and virtual switches. This product must integrate with their existing third-party networking equipment.
Which HPE management solution meets the customer’s needs?
A customer has an existing environment that contains a mixture of network vendors. The customer wants to manage all devices using a single interface.
What should the customer use to manage the devices?
You are designing a server solution that requires a significant amount of memory.
Which guideline should you keep in mind when working with memory channels?
A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following:
Which HPE storage platform will meet these requirements?
You are troubleshooting a HPE ProLiant rack-mount server. All installed server fans constantly run at 100%.
Which action should you take first?
You are installing a server solution in a customer’s data center.
How can you ensure that the installation complies with relevant electrical best practices? (Choose two.)
You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.
How should you install the PDUs to maximize power distribution and space efficiency?
Which storage array feature duplicates all the data from one original base volume to another volume called the destination volume?
You are configuring an internal Smart Array controller on an HPE ProLiant server.
Which statement is true regarding the drives in the logical array?
A customer plans to purchase five HPE DL380 Gb 2-port 530SFP Ethernet Adapters. The customer's network administrator has Installed a top of rack 10 GbE switch capable of supporting copper and optical connections. The customer is already over budget and needs to keep costs down.
Which option should you recommend Tor connecting to the switch?
A customer needs a Fibre Channel storage solution that supports block storage with the lowest cost.
Which HPE solution meets this customer’s requirements?
You are configuring an MSA 2052 for one of your customers in OCA.
Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.
What is the process or writing data to two locations within a single array in real time?
A security client needs a surveillance solution to support 239 Cameras. They expect to generate 2PB of data and require a 10Gb network infrastructure in a single rack.
Which solution should you recommend to meet the customer requirements?
Indicate whether each management feature manages or monitors a single system or multiple systems.
A Network administrator connects two switches together with multiple links of the same speed, duplex, and media type. The administrator expected the links to be aggregated, but they are not. The administrator confirmed that the ports are part of the appropriate link aggregation groups and that the permitted VLANs match.
Switch A has the lower LACP System Priority.
Which LACP operation states describe the failure above?
A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.
Identify the correct component configurations on the left and drag them to the answer area on the right. (Choose two.)
You are reviewing a series of MSA2052 storage designs for a customer’s remote locations. Their largest
remote site requires the highest possible level of internal data protection with at least 20 TB of storage. Which disk drive design is adequate for this site?
Read the question, and then refer to the exhibit.
A customer added a new switch to their network. They connected it using interface Ten-GigabitEthernet 1/0/1. They are using VLAN 10 and 20 for the devices in their network.
The new switch was fully operational. Then, the customer experienced a power failure later that day and could not reach any device on the new switch after the power returned.
From the output in the exhibit, would could be the issue?
Match the feature to the lowest iLO5 license in which it is available
What is an access port on an Ethernet switch?
A system administrator is performing the BIOS/Platform configuration of a DL380 Gen10 servers You notice the amber health LED.
The health status of which solution components can be verified with embedded UEFI Diagnostics? {Select two.)
Match each characteristic to the appropriate RAID level.
A customer wants to optimize the performance or its storage array by moving data residing in one class or disks to a more appropriate class of disks based on data access patterns without manual intervention.
Which HPE storage techno logy/feature will meet the customer requirement when the data is stored on an HPE 3PAR storage?
You have configured a port on an HPE FlexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs.
Given the configuration above, what should happen to any of the untagged traffic coming from the VMware ESXi host?
A customer needs to consolidate software, hardware, and backup in a single integrated solution to reduce the cost and complexity of their IT environment
Which solution meets the customer needs?
A nigh school is implementing a DHCP servers to support then production environment. They have the following requirements
• six rack servers, each with 1 CPU from Intel, at least 256GB of RAM. FC Dual Port HBA
• HPE Nimble AF20 with 17TB useable capacity
• integration into their existing HPE FlexFabric 5710 and HPE SN30O0B Fibre Channel SAN switches
if the customer needs more capacity in the future, they will use scale-out growth. Which server model should you recommend to this client?
A customer has a VMware environment with HPE ProLiant servers and Nimble storage. They have been using a Windows VM to provide file services for their employees.
The customer is experiencing performance issues with the solution due to memory constraints on the virtual environment.
What could be added to the existing environment that will provide dedicated file services with better performance that would still utilize the existing storage and backup solutions?
What connection type is identified by the following address type? B4-D5-BD-9F-0A-C3
You are discussing storage types with a customer that is configuring their NAS solution. The company's application developers use user-generated media and image files.
For which type of data should this customer use file storage?
HPE Support asks you to generate an SSD wear gauge report for local storage on an HPE DL360 Gen10 server running VMware.
Which procedure will ensure that the server will boot directly into a maintenance state so you can generate the requested report?
A customer is planning to deploy a new Top of Rack solution. They plan to use a stacking technology that meets the following requirements:
Which stacking technology meets the customer’s requirements?
Refer to the exhibit.
You are asked to review a server configuration for a customer before it is quoted. The server will be used in a business-critical environment and high availability is required. The server configuration is shown in the exhibit.
What should be added to the configuration to ensure availability?
Copyright © 2021-2024 CertsTopics. All Rights Reserved
