New Year Special 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: save70

JNCIP-DC JN0-682 Exam Questions and Answers PDF

Page: 2 / 12
Total 154 questions

Data Center Professional (JNCIP-DC) Questions and Answers

Question 5

You are building an IP fabric underlay network for your new data center. You must ensure that you have predictable load-balancing behavior throughout your network. According to Juniper Networks, what are two best practices that should be followed in this scenario? (Choose two.)

Options:

A.

All leaf devices must be identical to the spine device models including the same installed line cards.

B.

All spine devices should be identical models including the same installed line cards.

C.

Every leaf device should have an identical uplink to every other leaf device.

D.

Every leaf device should have an identical uplink to every spine device.

Question 6

You are implementing perimeter security for your data center. You need to inspect all traffic Layer 7 and ensure the failure of a port or device will not result in an interruption to traffic flows. In this scenario, which design would satisfy these requirements?

Options:

A.

MX with MC LAG

B.

QFX Virtual Chassis

C.

SRX Chassis cluster

D.

SRX using LAG

Question 7

Referring to the exhibit,

what happens when you initiate ZTP on a QFX5120 switch running Junos

21.3R1.9?

Options:

A.

ZTP skips both the Junos installation and the configuration.

B.

ZTP performs the Junos installation but skips the configuration.

C.

ZTP performs both the Junos installation and the configuration.

D.

ZTP skips the Junos installation but applies the configuration.

Question 8

What happens when a packet is encapsulated by a VXLAN before being placed in the overlay?

Options:

A.

The TTL is decremented by two and placed in the VXLAN header.

B.

The QoS marketing are placed in the VXLAN header.

C.

The VLAN-ID is placed in the VXLAN header.

D.

A VNI that maps to the VLAN-ID placed in the VXLAN header.

Page: 2 / 12
Total 154 questions